Roland XV-3080 用户手册

1. Insert the memory card containing the files you want to 

copy into the slot, then press [Enter].

fig.7-20a

2. Rotate the VALUE dial to select the file that will be 

copied, and then press [ENTER].

fig.7-20b

3. When the display shown above appears, insert the copy 

destination card and press [ENTER].

4. Press [

] or [

] to move the cursor, and then 

create the name by turning the VALUE dial or pressing 
the [INC] or [DEC] buttons to select the desired 
characters (up to 8 characters). For more detailed 
information, refer to Step 4 of “Transmitting to a 
Memory Card (Save)” (p. 125).

fig.7-20c

5. Press [ENTER] to execute the File Copy, and the 

following display will appear.

fig.7-20d

When repeating the copy procedure with another file or 
other data, press [ENTER]. To exit the operation, press 
[EXIT].

You can view the number of files on a memory card, its 
remaining free memory, and the size of each file. You can 
also change and delete registration of groups (CD-A through 
CD-H).

fig.7-21

Pressing [A]–[H] in this window displays the files registered 
to the applicable group. The display does not change if there 
is no data registered to the group corresponding to the 
button pressed.

Pressing [SHIFT] switches the display to the display shown 
in the figure below.

fig.7-22

The registerd group will be indicated as “*.”

• Changing Groups

Rotate the VALUE dial to select the source file to be 
changed. Hold down [SHIFT] and press one of the 
buttons [A]–[H] to substitute the files for the files 
registered in the applicable group.

• Deleting Groups

Rotate the VALUE dial to select the file to be deleted. 
Hold down [SHIFT] and press [UNDO] to execute the 
deletion of the group.

You can transmit sound generator or System settings that are 
in the XV-3080’s memory – or stored on a memory card – to 
an external MIDI device or to the XV-3080’s USER memory.

The act of transmitting Patch, Performance, Rhythm Set or 
System data to an external MIDI device is called a “bulk 
dump.” You can perform a bulk dump when two XV-3080s 
are connected to each other, or when you wish to store Patch, 
Performance, Rhythm Set or System data on an external 
MIDI device as a safety backup of your XV-3080 data.

fig.7-23.e

While data is being transmitted, the following display will 
appear.

fig.7-24

To cancel data transmission, press [EXIT].

Data type

Source block

Destination