Roland XV-3080 用户手册
29
Chapter 2 Using the XV-3080 Effects
Chapter 2
PERFORM CHO OUT (Performance
Chorus Output)
Chorus Output)
Output Assign (Chorus Output Assign) A/B/C
This setting selects the pair of OUTPUT jacks to which the
Chorus unit’s stereo output is routed when Chorus Output
Select is set to “MAIN” or “MAIN+R.”
Chorus unit’s stereo output is routed when Chorus Output
Select is set to “MAIN” or “MAIN+R.”
Level (Chorus Level) 0–127
This setting determines the Chorus output level.
Select (Chorus Output Select)
This parameter allows you to send the Chorus output
directly to the currently selected OUTPUT jacks, to the
Reverb, or to both.
directly to the currently selected OUTPUT jacks, to the
Reverb, or to both.
MAIN:
The Chorus output is sent only to the OUTPUT jacks.
fig.2-03x.e
REV:
The Chorus output is sent only to the Reverb.
fig.2-03y.e
MAIN+R:
The Chorus output is sent to the OUTPUT jacks
and to the Reverb.
fig.2-03z.e
Making Reverb Settings
These settings allow you to select the desired type of Reverb,
its characteristics, and the pair of OUTPUT jacks to which the
Reverb unit’s stereo output is routed.
its characteristics, and the pair of OUTPUT jacks to which the
Reverb unit’s stereo output is routed.
PERFORM REV TYPE (Performance
Reverb Type)
Reverb Type)
You can choose from a variety of reverb types.
Type (Reverb Type)
REVERB:
Normal Reverb
BRIGHT ROOM:
This reverb simulates typical room acoustic
reflections.
BRIGHT HALL:
This reverb simulates typical concert hall
acoustic reflections.
BRIGHT PLATE:
This reverb simulates a reverb plate, a
popular type of artificial reverb unit that derives its sound
from the vibration of a metallic plate. You can also achieve
unusual metallic-sounding reverbs using BRIGHT PLATE.
from the vibration of a metallic plate. You can also achieve
unusual metallic-sounding reverbs using BRIGHT PLATE.
Source (Reverb Source) PERFORM/PART 1–16
Set this when assigning reverb settings that are used by
another part. Select PERFORM when using the
Performance's reverb settings. When using the reverb
settings assigned to one of the parts, select the part number.
another part. Select PERFORM when using the
Performance's reverb settings. When using the reverb
settings assigned to one of the parts, select the part number.
PERFORM REV PRM (Performance
Reverb Parameter)
Reverb Parameter)
For REVERB
Type (Reverb/Delay Type)
This selects a type of reverb or delay.
ROOM1:
This is a short reverb with high density
ROOM2:
This is a short reverb with low density.
STAGE1:
This is a long reverb.
STAGE2:
This is a reverb with strong early reflections.
HALL1:
This is a very clear-sounding reverb.
HALL2:
This is a rich reverb.
DELAY:
This is a conventional delay effect.
PAN-DLY:
This is a delay effect with echoes that pan left and
right.
Time (Reverb/Delay Time)
When the Type setting is ROOM1–HALL2, this adjusts the
length of reverberation. When the Type setting is DELAY or
PAN-DLY, this adjusts the delay time.
length of reverberation. When the Type setting is DELAY or
PAN-DLY, this adjusts the delay time.
Higher settings produce a more spacious ambience.
OUTPUT
OUTPUT
Chorus Input
Chorus
Reverb
OUTPUT
OUTPUT
Chorus Input
Reverb Input
Chorus
Reverb