Roland VK-8 用户手册

The VK-8 is not equipped with an amplifier or speakers. In order to hear the sound, 

you will need to connect audio equipment such as a monitor speaker system or 

stereo set, or use headphones.

fig.01-02

Use audio cables to connect audio equipment, such as an amp or speakers. If you are 

using headphones, plug them into the PHONES jack.

To prevent malfunction and/

or damage to speakers or other 

devices, always turn down the 

volume, and turn off the 

power on all devices before 

making any connections.

Audio Set

Powered Amplifier

Mixer

Audio

cable

Headphones

Monitor
Speaker

In order to take full advantage 
of the VK-8’s performance, we 
recommend using a stereo 
amp/speaker system. If you 
are using a mono system, 
make the connections to the 
OUTPUT L (MONO) jack.

Audio cables and headphones 
are not included. You will 
need to provide these 
separately.

The VK-8’s OUTPUT jacks support both balanced output and unbalanced output. 

To use balanced output, use a cable with a balanced (TRS type) phone plug. To use 

unbalance output, use a cable with an unbalanced (TS type) phone plug.

fig.01-03

SLEEVE (Ground)

TIP (HOT)

SLEEVE (Ground)

TIP (HOT)

RING (Cold)

In consideration of live concert 
situations, the VK-8’s 
PHONES jack is designed to 
produce a higher volume level 
than that of other electronic 
instruments. 
Extended listening at high 
volume levels may damage 
your hearing, so use caution 
when adjusting the volume.