Roland VK-8 用户手册

 

291b

 

301

 

• Do not use this unit on the same power circuit with any 

device that will generate line noise (such as an electric 
motor or variable lighting system).

 

307

 

• Before connecting this unit to other devices, turn off the 

power to all units. This will help prevent malfunctions 
and/or damage to speakers or other devices.

 

308

 

• Although the LCD and LEDs are switched off when the 

POWER switch is switched off, this does not mean that the 
unit has been completely disconnected from the source of 
power. If you need to turn off the power completely, first 
turn off the POWER switch, then unplug the power cord 
from the power outlet. For this reason, the outlet into 
which you choose to connect the power cord’s plug 
should be one that is within easy reach.

 

351

 

• Using the unit near power amplifiers (or other equipment 

containing large power transformers) may induce hum. 
To alleviate the problem, change the orientation of this 
unit; or move it farther away from the source of inter-
ference.

 

352a

 

• This device may interfere with radio and television 

reception. Do not use this device in the vicinity of such 
receivers.

 

352b

 

• Noise may be produced if wireless communications 

devices, such as cell phones, are operated in the vicinity of 
this unit. Such noise could occur when receiving or initi-
ating a call, or while conversing. Should you experience 
such problems, you should relocate such wireless devices 
so they are at a greater distance from this unit, or switch 
them off.

 

354b

 

• Do not expose the unit to direct sunlight, place it near 

devices that radiate heat, leave it inside an enclosed 
vehicle, or otherwise subject it to temperature extremes. 
Also, do not allow lighting devices that normally are used 
while their light source is very close to the unit (such as a 
piano light), or powerful spotlights to shine upon the 
same area of the unit for extended periods of time. 
Excessive heat can deform or discolor the unit.

 

355b

 

• When moved from one location to another where the 

temperature and/or humidity is very different, water 
droplets (condensation) may form inside the unit. Damage 
or malfunction may result if you attempt to use the unit in 
this condition. Therefore, before using the unit, you must 
allow it to stand for several hours, until the condensation 
has completely evaporated.

 

356

 

• Do not allow rubber, vinyl, or similar materials to remain 

on the unit for long periods of time. Such objects can 
discolor or otherwise harmfully affect the finish.

 

358

 

• Do not allow objects to remain on top of the keyboard. 

This can be the cause of malfunction, such as keys ceasing 
to produce sound.

 

359

 

• Do not paste stickers, decals, or the like to this instrument. 

Peeling such matter off the instrument may damage the 
exterior finish.

 

401b

 

• To clean the unit, use a dry, soft cloth; or one that is 

slightly dampened. Try to wipe the entire surface using an 
equal amount of strength, moving the cloth along with the 
grain of the wood. Rubbing too hard in the same area can 
damage the finish.

 

402

 

• Never use benzine, thinners, alcohol or solvents of any 

kind, to avoid the possibility of discoloration and/or 
deformation.

 

553

 

• Use a reasonable amount of care when using the unit’s 

buttons, sliders, or other controls; and when using its jacks 
and connectors. Rough handling can lead to malfunctions.

 

556

 

• When connecting / disconnecting all cables, grasp the 

connector itself—never pull on the cable. This way you 
will avoid causing shorts, or damage to the cable’s 
internal elements.

 

557

 

• A small amount of heat will radiate from the unit during 

normal operation.

 

558a

 

• To avoid disturbing your neighbors, try to keep the unit’s 

volume at reasonable levels. You may prefer to use 
headphones, so you do not need to be concerned about 
those around you (especially when it is late at night).

 

559a

 

•  When you need to transport the unit, package it in the box 

(including padding) that it came in, if possible. Otherwise, 
you will need to use equivalent packaging materials.

 

561

 

• Use only the specified expression pedal (EV-7; sold 

separately). By connecting any other expression pedals, 
you risk causing malfunction and/or damage to the unit.