Roland VK-8 用户手册
65
Troubleshooting
MIDI messages are not transmit-
ted/receive correctly
ted/receive correctly
The MIDI channel of each part is not
set correctly.
set correctly.
Set the MIDI channels correctly.
The Control MIDI Channel is not set
correctly.
correctly.
Make sure that the VK-8’s program
changes and expression data are be-
ing transmitted on the correct MIDI
channel.
changes and expression data are be-
ing transmitted on the correct MIDI
channel.
The sequencer playback tempo is
not set correctly.
not set correctly.
Have the sequencer play back the
data at the same tempo that was
used when the exclusive data was
recorded.
data at the same tempo that was
used when the exclusive data was
recorded.
The Sub Keyboard Function is not
set correctly.
set correctly.
Check the Sub Keyboard Function
setting.
setting.
Can’t hear spring shock noise
Reverb level is set to 0.
Turn the REVERB [LEVEL] knob
clockwise to adjust the reverb level.
clockwise to adjust the reverb level.
Can’t hear the 1' harmonic bar
PERCUSSION is turned on.
If PERCUSSION is on, the sound of
the 1' harmonic bar will not be
heard.
If PERCUSSION is on, the sound of
the 1' harmonic bar will not be
heard.
This is not malfunction.
- - -
Rotary changes to FAST uninten-
tionally
tionally
Control pedal or D Beam is assigned
to “CRESCENDO.”
If the control pedal or D Beam is as-
signed to “CRESCENDO” when the
[SLOW/FAST] button is in the
SLOW state, and you fully depress
the control pedal, or place your
hand very close to the D Beam, the
rotary will switch to FAST.
to “CRESCENDO.”
If the control pedal or D Beam is as-
signed to “CRESCENDO” when the
[SLOW/FAST] button is in the
SLOW state, and you fully depress
the control pedal, or place your
hand very close to the D Beam, the
rotary will switch to FAST.
If the [SLOW/FAST] button is in the
SLOW state, rocking back onto the
heel of the control pedal, or moving
your hand away from the D Beam
will cause the rotary to return to
SLOW.
SLOW state, rocking back onto the
heel of the control pedal, or moving
your hand away from the D Beam
will cause the rotary to return to
SLOW.
Hold pedal or control pedal oper-
ation is reversed
ation is reversed
The control pedal’s polarity is re-
versed.
versed.
Depending on the type of pedal
switch or expression pedal, it may
have the opposite operation when
depressed. Switch the polarity of the
control pedal.
switch or expression pedal, it may
have the opposite operation when
depressed. Switch the polarity of the
control pedal.
D Beam sensitivity is incorrect
Something was covering the D Beam
when the power was turned on.
When the power is turned on, the
VK-8 automatically adjusts the sen-
sitivity of the D Beam. For this rea-
son, do not place any objects on the
D Beam or cover it with your hand
when the power is turned on.
when the power was turned on.
When the power is turned on, the
VK-8 automatically adjusts the sen-
sitivity of the D Beam. For this rea-
son, do not place any objects on the
D Beam or cover it with your hand
when the power is turned on.
Readjust the sensitivity of the D
Beam.
Beam.
D Beam sensitivity is incorrect.
Readjust the sensitivity of the D
Beam.
Beam.
The instrument is placed in a loca-
tion where there is a large amount of
infrared light.
tion where there is a large amount of
infrared light.
The D Beam will not function cor-
rectly in a location where there is a
large amount of infrared light.
rectly in a location where there is a
large amount of infrared light.
Preset memory contents are lost
The power was turned off while
data was being written into preset
memory.
data was being written into preset
memory.
Never turn off the power while data
is being written into preset memory.
is being written into preset memory.
- - -
Can’t select Other Tones
The VK-8 is in Preset mode
Get the [PRESET] button to go out,
thus turning off Preset mode.
thus turning off Preset mode.
The VK-8 is in Edit mode.
Exit Edit mode.
The VK-8 is in Demo mode.
Exit Demo mode.
Problem
Check
Solution
Page