Roland SP-606 用户手册
84
Chapter 13. About USB
1.
2.
Press [MENU] to get the Top Menu screen.
3.
Use [
][
] to move the cursor to the “4:USB Audio/MIDI” line,
and press [ENTER].
The
USB AUDIO/MIDI
screen will appear.
4.
Use [
][
] to select the setting (parameter) you want to edit.
Turn the VALUE dial or use [DEC][INC] to change the parameter value.
5.
Press [EXIT] to return to the Play screen.
USB Audio Signal Flow
Making USB Audio and MIDI Settings
Parameter
Value
Explanation
Vender Driver
OFF,
ON
ON
Specifies the type of USB driver that will be used.
OFF
: Use the driver provided by Windows or Mac OS.
*
After you change this setting, you need to cycle the power to the
SP-606.
ON
: Use the Roland driver. Choose this setting when using P606 or in
order to take full advantage of the SP-606’s capabilities.
USB Audio Input Sw
OFF,
ON
ON
Turns USB audio input on/off.
*
This setting is not remembered when you turn off the power.
USB Audio Output Src
OFF,
INPUT,
MIX
INPUT,
MIX
OFF
: Not used.
INPUT
: The audio signal selected for “Input Select” in the INPUT SET-
MIX
: The same audio signal as the OUTPUT and PHONES output will
be sent to USB.
*
If you turn “USB Audio Input Sw”
ON
and make settings so that
the audio signals coming into your USB-connected computer are
being “thru-ed” (re-transmitted), be aware that the audio signals
may loop and cause oscillation. Please use caution.
being “thru-ed” (re-transmitted), be aware that the audio signals
may loop and cause oscillation. Please use caution.
*
This setting is not remembered when you turn off the power.
Sampler
Input
Output
SP-606
PC
Input
Source
USB Audio
Input SW
USB Audio
Output Src
INPUT
MIX
SP-606_e.book 84 ページ ２００４年６月２１日 月曜日 午前１０時８分