Roland SP-606 用户手册

 

Roland Corporation accepts no responsibility for the recovery of data lost from internal memory or memory card, 
nor any damages resulting from such loss.

 

SYSTEM DAMAGED

A serious problem has occurred in the memory 
because the power was not turned off correctly. 
The memory has been initialized in order to re-
cover the contents; please turn the power off and 
then on again.

You must use the correct procedure to turn off 
the power. (p. 21)

 

MEMORY INITIALIZE

 

Memory was lost because the power was not 
turned off correctly. The memory is being initial-
ized.

MEMORY RESTORE

Part of the memory was damaged because the 
power was not turned off correctly. The memory 
contents are being recovered.

Memory Full!

The operation cannot be executed because there 
is not enough remaining memory.

Delete unneeded data (samples, patterns, songs). 
(p. 32, p. 62, p. 65)

Memory Damaged!

The contents of internal memory were damaged.

Execute the System Initialize operation (p. 80). If 
this does not resolve the problem, contact your 
dealer or a Roland service center.

 

Not Supported Format!

 

You inserted a card of a capacity that the SP-606 
cannot use.

The SP-606 can use CompactFlash cards with a 
capacity of from 16 MB through 512 MB (3.3V). 
Check the card you are using.

You are attempting to import an audio file that 
the SP-606 cannot import.

Check the points of caution regarding the import 
of audio files (p. 68).

Unformatted!

You inserted a memory card of a format that the 
SP-606 cannot use.

Card Damaged!

The contents of the memory card were damaged.

Card Ejected!

You removed the card without performing the 
Shutdown procedure. The contents of internal 
memory or the memory card may have been 
damaged.

—

SP-606_e.book 90 ページ ２００４年６月２１日　月曜日　午前１０時８分