Roland VS-880EX 用户手册
21. Press [PLAY] to begin playback of the song.
22. Adjust the volume balance with the faders for
Channels 1–4. The presently monitored sound
(volume levels, pan) will be recorded to Tracks 5
and 6 just as you hear it. You can raise the volume
as much as possible without causing distortion.
(volume levels, pan) will be recorded to Tracks 5
and 6 just as you hear it. You can raise the volume
as much as possible without causing distortion.
23. Press [STOP] to stop playback of the song.
Record and Check the Content
24. Press [ZERO] to return to the beginning of the
song.
25. While pressing [REC], press the STATUS button
for Track 5 (or 6).
The STATUS indicator blinks red.
26. Press [REC].
The REC indicator blinks red.
The REC indicator blinks red.
27. Press [PLAY].
The PLAY indicator lights green, and starts recording.
The PLAY indicator lights green, and starts recording.
28. When recording is finished, press [STOP].
This stops the song.
This stops the song.
29. Check the content of the recording. Press [ZERO]
to return to the beginning of the song.
30. Mute (sound is prevented from playing) Tracks
1–4. Press the STATUS buttons for Tracks 1–4.
The STATUS indicators go off.
31. Press [PLAY] to begin playback of the song.
Use the channel faders 5 and the master fader to adjust
the volume to a comfortable level.
Use the channel faders 5 and the master fader to adjust
the volume to a comfortable level.
Applying Reverb While Track Bouncing
Sometimes you may want to record previously-record-
ed tracks to another track while apply the effects to
them. Here is how to add reverb to Tracks 1–4 while
bouncing these tracks to Tracks 5 and 6. This can be
convenient when you want to add spatial effects such
as reverb and delay to each track while mixing down.
ed tracks to another track while apply the effects to
them. Here is how to add reverb to Tracks 1–4 while
bouncing these tracks to Tracks 5 and 6. This can be
convenient when you want to add spatial effects such
as reverb and delay to each track while mixing down.
Select an Effect
1. Press [EFFECT] several times until “EFFECT-1
PRM?” appears in the display.
2. Press [YES].
The number and name of the currently selected effect
will be displayed, and you can select the desired
effect.
The number and name of the currently selected effect
will be displayed, and you can select the desired
effect.
3. Use the TIME/VALUE dial to select the effect you
wish to use. Here, select “A00 RV:LargeHall.”
4. After selecting the effect, press [YES].
Specify the Track to Which the Effect is
to be Applied
to be Applied
5. Press [FADER (EDIT)] to light the TR (Track) indi-
cator.
6. Hold down [SHIFT] and press the channel 7
[EFFECT-1 (CH EDIT)].
“EFFECT1=” appears in the display.
7. Press the channel 1 [CH EDIT (SELECT)].
8. Rotate the TIME/VALUE dial.
CONDITION MARKER#
MASTER
INPUT TRACK
AUX
TIME
48
24
4
0
dB
12
Effect Number
Effect Name
Chapter 3 Multi-Track Recording
61
Chapter 3