Roland VS-880EX 用户手册
36. Press PARAMETER [
]. You can return to the
previous screen by pressing PARAMETER [
].
37. “IN* SndPan” appears in the display. Use the
TIME/VALUE dial to adjust the send pan.
38. Press PARAMETER [
]. You can return to the
previous screen by pressing PARAMETER [
].
39. “Master Sel=” appears in the display. Use the
TIME/VALUE dial to select the bus (MIX, AUX,
FX1, FX2, REC) that you wish to output from the
MASTER jacks.
FX1, FX2, REC) that you wish to output from the
MASTER jacks.
40. Press PARAMETER [
]. You can return to the
previous screen by pressing PARAMETER [
].
41. “EQ Sel=” appears in the display. Rotate the
TIME/VALUE dial.
42. Press PARAMETER [
]. You can return to the
previous screen by pressing PARAMETER [
].
43. “Direct Out =” appears in the display. Rotate the
TIME/VALUE dial. If you do not wish to use
Direct OUT, select “Off.” If you wish to output
tracks 1–4, select “1-4.” If you wish to output
tracks 5–8, select “5-8.”
Direct OUT, select “Off.” If you wish to output
tracks 1–4, select “1-4.” If you wish to output
tracks 5–8, select “5-8.”
44. Press PARAMETER [
]. You can return to the
previous screen by pressing PARAMETER [
].
45. “FX1 MstIns=” appears in the display. Rotate the
TIME/VALUE dial. If you wish to insert effect 1
into the master out, select “On.” If not, select
“Off.” If effect 1 has been inserted in another
channel, the display will indicate “—” and this
item cannot be set.
into the master out, select “On.” If not, select
“Off.” If effect 1 has been inserted in another
channel, the display will indicate “—” and this
item cannot be set.
46. Press PARAMETER [
]. You can return to the
previous screen by pressing PARAMETER [
].
47. “FX2 MstIns=” appears in the display. Rotate the
TIME/VALUE dial. If you wish to insert effect 2
into the master out, select “On.” If not, select
“Off.” If effect 2 has been inserted in another
channel, the display will indicate “—” and this
item cannot be set.
into the master out, select “On.” If not, select
“Off.” If effect 2 has been inserted in another
channel, the display will indicate “—” and this
item cannot be set.
48. Press PARAMETER [
]. You can return to the
previous screen by pressing PARAMETER [
].
49. “Change Routing ?” appears in the display. Press
[YES]. When the routing has been finalized,
“Complete” appears in the display, and you will
return to Play condition. If you decide to discard
the routing that was set, press [NO].
“Complete” appears in the display, and you will
return to Play condition. If you decide to discard
the routing that was set, press [NO].
CONDITION MARKER#
MASTER
INPUT TRACK
AUX
TIME
48
24
4
0
dB
12
CONDITION MARKER#
MASTER
INPUT TRACK
AUX
TIME
48
24
4
0
dB
12
CONDITION MARKER#
MASTER
INPUT TRACK
AUX
TIME
48
24
4
0
dB
12
CONDITION MARKER#
MASTER
INPUT TRACK
AUX
TIME
48
24
4
0
dB
12
CONDITION MARKER#
MASTER
INPUT TRACK
AUX
TIME
48
24
4
0
dB
12
Chapter 5 Storing Mixer Settings
80