Roland VS-880EX 用户手册
26. “AUX Snd=” appears in the display. Rotate the
TIME/VALUE dial. If you wish to send the
track/source to the AUX bus, select either “Pre”
or “Pst,” and proceed to step 27. If you do not
wish to send the track/source to the AUX bus,
select “Off,” and proceed to step 31.
track/source to the AUX bus, select either “Pre”
or “Pst,” and proceed to step 27. If you do not
wish to send the track/source to the AUX bus,
select “Off,” and proceed to step 31.
27. Press PARAMETER [
]. You can return to the
previous screen by pressing PARAMETER [
].
28. “TR* SndLev =” appears in the display. Use the
TIME/VALUE dial to adjust the send level.
29. Press PARAMETER [
]. You can return to the
previous screen by pressing PARAMETER [
].
30. “TR* SndPan” appears in the display. Use the
TIME/VALUE dial to adjust the send pan.
31. Press PARAMETER [
]. You can return to the
previous screen by pressing PARAMETER [
].
32. “Master Sel=” appears in the display. Use the
TIME/VALUE dial to select the bus (MIX, AUX,
FX1, FX2, REC) that you wish to output from the
MASTER jacks.
FX1, FX2, REC) that you wish to output from the
MASTER jacks.
33. Press PARAMETER [
]. You can return to the
previous screen by pressing PARAMETER [
].
34. “EQ Sel=” appears in the display. Rotate the
TIME/VALUE dial.
35. Press PARAMETER [
]. You can return to the
previous screen by pressing PARAMETER [
].
36. “Direct Out =” appears in the display. Rotate the
TIME/VALUE dial. If you do not wish to use
Direct OUT, select “Off.” If you wish to output
tracks 1–4, select “1-4.” If you wish to output
tracks 5–8, select “5-8.”
Direct OUT, select “Off.” If you wish to output
tracks 1–4, select “1-4.” If you wish to output
tracks 5–8, select “5-8.”
37. Press PARAMETER [
]. You can return to the
previous screen by pressing PARAMETER [
].
38. “FX1 MstIns=” appears in the display. Rotate the
TIME/VALUE dial. If you wish to insert effect 1
into the master out, select “On.” If not, select
“Off.” If effect 1 has been inserted in another
channel, the display will indicate “—” and this
item cannot be set.
into the master out, select “On.” If not, select
“Off.” If effect 1 has been inserted in another
channel, the display will indicate “—” and this
item cannot be set.
39. Press PARAMETER [
]. You can return to the
previous screen by pressing PARAMETER [
].
CONDITION MARKER#
MASTER
INPUT TRACK
AUX
TIME
48
24
4
0
dB
12
CONDITION MARKER#
MASTER
INPUT TRACK
AUX
TIME
48
24
4
0
dB
12
CONDITION MARKER#
MASTER
INPUT TRACK
AUX
TIME
48
24
4
0
dB
12
CONDITION MARKER#
MASTER
INPUT TRACK
AUX
TIME
48
24
4
0
dB
12
CONDITION MARKER#
MASTER
INPUT TRACK
AUX
TIME
48
24
4
0
dB
12
Chapter 5 Storing Mixer Settings
86