Roland VS-1824 用户手册
101
Chapter 7 Using Internal Effects (VS8F-2)
Chapter 7
Selecting Effect Patches
An effect setting is referred to as a “patch.” The VS8F-2
provides over 240 preset patches and 200 user patches. Use
the following procedure to select a preset patch.
provides over 240 preset patches and 200 user patches. Use
the following procedure to select a preset patch.
Selecting a Preset Patch
1. Press [PLAY (DISPLAY)].
2. To use EFFECT A (FX1 and FX2), hold [SHIFT] and press
[F3 (EFFECT A)]. To use EFFECT B (FX3 and FX4), hold
[SHIFT] and press [F4 (EFFECT B)].
[SHIFT] and press [F4 (EFFECT B)].
3. Press [F1 (FX1)]. The Effect 1 screen appears in the
display. If “FX1” does not appear above [F1], press [F6
(EXIT)] until it does. Then, press [F1 (FX1)].
(EXIT)] until it does. Then, press [F1 (FX1)].
4. Press [F2 (Sel)]. The effects list appears in the display.
5. Use the TIME/VALUE dial or [
], [
], [
],
and [
] to move the cursor to the effect you wish to
use. The function buttons work as shown below.
fig.05-02
[F1 (Preset)]:
Displays the Preset patch list.
[F2 (User)]:
Displays the User patch list.
[F4 (Exec)]:
Selects the effect and exits the screen.
[F6 (EXIT)]:
Exits the screen without selecting the effect.
6. Press [F4 (Exec)] or press [ENTER/YES] to select the
effect. The EFFECT 1 screen appears in the display.
7. Press [PLAY (DISPLAY)] to return to the Playlist display.
* Patches using the Reverb, Gated Reverb, Vocoder 2, Voice
Transformer or Mastering Tool Kit algorithms cannot be
selected for FX2 and FX4. A horizontal line is drawn through
the effect name in such cases. If you want to use these
algorithms, select them from FX1 or FX 3:
selected for FX2 and FX4. A horizontal line is drawn through
the effect name in such cases. If you want to use these
algorithms, select them from FX1 or FX 3:
fig.05-11
* With some effects, you may not want the direct sound output,
or other special settings may be required. Please refer to
“Algorithm List” (Appendices p. 25) when making these
settings.
“Algorithm List” (Appendices p. 25) when making these
settings.
Current Effect
Cursor
Function Buttons
If “No Effect Board” Appears in the Display
This indicates there is no VS8F-2 installed. In this case,
you cannot use the internal effects. If the message
appears even when a VS8F-2 is installed, it indicates that
the effect board is not installed properly. Perform the
shutdown procedure and turn the power off as
described in “Turning Off the Power” (p. 32), and then
reinstall the VS8F-2 correctly.
you cannot use the internal effects. If the message
appears even when a VS8F-2 is installed, it indicates that
the effect board is not installed properly. Perform the
shutdown procedure and turn the power off as
described in “Turning Off the Power” (p. 32), and then
reinstall the VS8F-2 correctly.