Roland VS-1824 用户手册

Chapter 9

8. Use [

] and [

] to move to the last marker of the 

area from which you wish to erase Automix value, and 
press [F1 (Out)]. 

Checkmarks will be added to the area specified for erasure.

fig.4-04.e

Even if you wish to erase the Automix data for only one marker, 
press [F1 (In)] and then [F1 (Out)] for the desired marker.

You can turn the TIME/VALUE dial to modify the Automix 
setting value at the cursor location. If you wish to re-select 

the Automix value that will be erased, press [

].

9. Press [F2 (Erase)].

fig.4-05_80

This will indicate the type of Automix data that you selected 
to be erased in Step 6. If you wish to erase all Automix data, 
use the TIME/VALUE dial to select “All Level and Pan.”

10. If you wish to erase the data, press [F4 (Exec)]. 

If you press [F6 (EXIT)], you will return to Step 7 without 
erasing any data.

11. A message will ask you to confirm the operation. Press 

[ENTER/YES]. If you press [EXIT/NO], the erasure will 

be halted, and you will return to Step 10.

fig.4-06

12. When the data has been erased, the display will indicate 

“Complete.” Press [PLAY (DISPLAY)].

This operation copies Automix data from a specific area, and 

overwrites it onto another location (specified data/time).

fig.4-07.e

Editing of the Automix data cannot be cancelled by the Undo 
function.

1. Press [PLAY (DISPLAY)].

2. Hold down [SHIFT] and press [F6 (UTIL)].

3. Press [PAGE] so that [F5] indicates “A.Mix,” and then 

press [F5 (A.Mix)].

4. Press [F2 (Micro)].

5. Press [PAGE] so that [F1] indicates “In.”

fig.4-03

6. Make sure that the cursor is located at “Edit Target,” and 

use the TIME/VALUE dial to select the type of Automix 

data that you wish to edit.

7. Use [

] and [

] to move the cursor to the first 

marker of the area from which you wish to copy 

Automix data, and press [F1 (In)].

Check marks

0 M0

M1

M2

M3

M4

M5

Time

0 M0

M1

M2

M3

M4

M5

Time

Copy area

Destination

Marker