Roland VS-1824 用户手册

• Install the unit on a solid, level surface in an area free 

from vibration.

• Remove any disc from the drive before powering up or 

down.

• Avoid using the unit immediately after it has been moved 

to a location with a level of humidity that is greatly 
different than its former location. Rapid changes in the 
environment can cause condensation to form inside the 
drive, which will adversely affect the operation of the drive 
and/or damage discs. When the unit has been moved, 
allow it to become accustomed to the new environment 
(allow a few hours) before operating it.

• To avoid the risk of malfunction and/or damage, insert 

only discs with 

 into the CD-RW drive. Never 

insert any other type of disc. Avoid getting paper clips, 
coins, or any other foreign objects inside the drive.

•  Do not attempt to remove the disc from the CD-RW 

drive while the drive is functioning (while the MIDI/
DISK indicator of VS-1824 or busy indicator of external 
CD-RW drive is lit).

• Do not attempt to carry a VS-1824 equipped with a 

CD-RW drive (VS-1824 CD) while a disc is loaded in the 
CD-RW drive.

• Do not touch the lens.

• When the lens is dirty, clean the lens with a commercial 

lens blower.

• When handling the discs, please observe the following.

❍  Do not touch the recorded surface of the disc.
❍  Do not use in dusty areas.
❍ Do not leave the disc in direct sunlight or an enclosed 

vehicle.

• Avoid touching or scratching the shiny underside 

(encoded surface) of the disc. Damaged or dirty discs 
may not read/write properly. Keep your discs clean 
using a commercially available CD cleaner.

• Keep the disc in the case.

• Do not keep the disc in the CD-RW drive for a long time.

• Do not put a sticker on the label of the disc.

• Wipe the disc with a soft and dry cloth radially from 

inside to outside. Do not wipe along circumference.

• Do not use benzine, record cleaner spray or solvents of 

any kind.

• Do not bend the disc.

• VS-1824

• Blank CD-R (Compact Disc-Recordable) or CD-RW 

(Compact Disc-Rewritable) disc

It is recommended to use CD-R discs from the following 
manufacturers.

Taiyo Yuden Co., TDK Co., Mitsui Chemicals Co., 
Mitsubishi Chemicals Inc., Ricoh Co.,Ltd, 
Hitachi Maxell Ltd. 

It is recommended to use CD-RW discs from the 
following manufacturers.

Ricoh Co., Ltd, Mitsubishi Chemicals Inc.

Recommended CD-R/CD-RW discs (approved by Roland) 
are shown in the owner's manual of the CD-R/RW drive.

• Audio equipment to be connected to the MASTER 

output jacks, or stereo headphones

If you are using a VS-1824 that is not 

equipped with an internal CD-RW drive, you will need to 
purchase a separately available CD-RW drive (approved by 
Roland). For instructions on connecting the drive, refer to 
“Connecting an External CD-R/CD-RW Drive” (p. 194).