Roland VS-1824 用户手册
207
Chapter 15 Using External MIDI Devices
Chapter 15
Switching Scenes
You can switch mixer Scenes with MIDI Program Change
messages sent by an external MIDI controller.
messages sent by an external MIDI controller.
1. Hold [SHIFT] and press [F5 (SYSTEM)]. The System
menu icon appears in the display. If the System menu
icon does not appear, press [F6 (EXIT)].
icon does not appear, press [F6 (EXIT)].
2. Press [F4 (MIDI)]. If “MIDI” does not appear in the
display above [F4], press [PAGE] until “MIDI” appears,
and then press [F4 (MIDI)].
and then press [F4 (MIDI)].
3. Use[
], [
], [
], and [
] to move the
cursor to “P.C.Scene,” and use the TIME/VALUE dial to
change the setting.
change the setting.
P.C.Scene (Program Change Scene)
With this set to “ON,” the scene is changed when
Program Change messages are received. For this
application, select “on.”
Program Change messages are received. For this
application, select “on.”
4. Press [PLAY (DISPLAY)] to return to the Playlist display.
Use MIDI Channel 16 for switching Scenes. The relationship
between the Program Change number received by the VS-
1824 and the Scene Number it switches to is shown here:
between the Program Change number received by the VS-
1824 and the Scene Number it switches to is shown here:
Program Number
Scene Number
1-8
1-8
* For more detailed information, refer to the “MIDI
Implementation” (Appendices p. 82).
Switching Effects
You can use MIDI Bank Select and Program Change
messages transmitted from an external MIDI controller to
switch effects.
messages transmitted from an external MIDI controller to
switch effects.
1. Press [PLAY (DISPLAY)].
2. Hold [SHIFT] and press [F5 (SYSTEM)]. The System
menu icon appears in the display. If the System menu
icon does not appear, press [F6 (EXIT)].
icon does not appear, press [F6 (EXIT)].
3. Press [F4 (MIDI)]. If “MIDI” does not appear in the
display above [F4], press [PAGE] until “MIDI” appears,
and then press [F4 (MIDI)].
and then press [F4 (MIDI)].
4. Use [
], [
], [
], and [
] to move the
cursor to “P.C.Eff,” and use the TIME/VALUE dial to
change the setting.
change the setting.
P.C.Eff (Program Change Effect)
With this set to “On,” the effect is changed when
Program Change messages are received. For this
application, select “On.”
Program Change messages are received. For this
application, select “On.”
5. Press [PLAY (DISPLAY)] to return to the Playlist display.
MIDI Channels 1-4 correspond to FX1-FX4 respectively. The
relationship between the bank number received by the VS-
1824 and the effect patch number it selects is shown here:
relationship between the bank number received by the VS-
1824 and the effect patch number it selects is shown here:
CC # 0
CC # 32
Bank # MSB
Bank # LSB
Program #
Patch #
0
0
1-100
P000-P099
0
1
1-100
P100-P199
0
2
1-40
P200-P239
0
3
1-100
U000-U099
0
4
1-100
U100-U199
During Playback of a Song
Scenes cannot be switched during song playback
without pausing playback as the settings are changed.
The VS-1824 will stop momentarily if it receives a
Program Change message during playback instructing it
to change Scenes. While it is stopped, the Scene is
switched, and then playback resumes. During recording,
only effect Program Change messages can be responded
to. Scenes cannot be switched during recording.
without pausing playback as the settings are changed.
The VS-1824 will stop momentarily if it receives a
Program Change message during playback instructing it
to change Scenes. While it is stopped, the Scene is
switched, and then playback resumes. During recording,
only effect Program Change messages can be responded
to. Scenes cannot be switched during recording.