Roland VS-1824 用户手册
250
Chapter 21 System and Global Settings
Peak Hold
You can set the display to hold the maximum values (peaks)
while the level meter is shown in the graphic display.
while the level meter is shown in the graphic display.
fig.12-16
1. Hold [SHIFT] and press [F5 (SYSTEM)].
The System Menu icon is displayed.
If the System Menu icon does not appear, press [F6 (EXIT)].
2. Press [F1 (SYSPM)].
If “SYSPM” does not appear above [F1], first press [PAGE]
until “SYSPM” appears, and then press [F1 (SYSPM)].
until “SYSPM” appears, and then press [F1 (SYSPM)].
3. Use [
], [
], [
], and [
] to move the
cursor to “Peak Hold Sw.” If “Peak H. Sw” is not
displayed, press [F1 (Prm1)].
displayed, press [F1 (Prm1)].
4. Use the TIME/VALUE dial to change the setting for Peak
Hold Switch.
Peak Hold Sw (Peak Hold Switch)
With this set to “On,” the level meter in the graphic
display holds the display of the maximum levels.
display holds the display of the maximum levels.
5. When you are done setting Peak Hold, press
[PLAY (DISPLAY)] to return to the Playlist display.
Each time you press [PLAY (DISPLAY)], the peak display is
reset (cleared). Switching to a display that does not show level
meters, such as switching to the Track Mixer screen, Song
Information or other displays also resets the peak display.
reset (cleared). Switching to a display that does not show level
meters, such as switching to the Track Mixer screen, Song
Information or other displays also resets the peak display.
Remaining Recording Time
The amount of free drive space available for recording in the
current song is displayed as “Remain” in the upper part of
the Playlist display when Song Information is shown. You
can select the units of measurement for this value.
current song is displayed as “Remain” in the upper part of
the Playlist display when Song Information is shown. You
can select the units of measurement for this value.
* “Remain” does not appear while the level meter or fader/pan
screens are displayed (p. 39). Hold [SHIFT] and press [PLAY
(DISPLAY)] until the Song Information screen is displayed.
(DISPLAY)] until the Song Information screen is displayed.
fig.12-17
1. Hold [SHIFT] and press [F5 (SYSTEM)].
The System Menu icon is displayed.
If the System Menu icon does not appear, press [F6 (EXIT)].
2. Press [F1 (SYSPM)].
If “SYSPM” does not appear above [F1], first press [PAGE]
until “SYSPM” appears, and then press [F1 (SYSPM)].
until “SYSPM” appears, and then press [F1 (SYSPM)].
3. Use [
], [
], [
], and [
] to move the
cursor to “Remain Display.”
If “Remain Display” is not displayed, press [F1 (Prm1)].
4. Use the TIME/VALUE dial to change the setting for the
Remain Display.
Remain Display (Remaining Display)
This selects the units of measurements in which the
remaining drive space is shown.
remaining drive space is shown.
Time:
The remaining time for recording is shown in minutes
and seconds.
and seconds.
CapaMB:
The remaining time for recording is shown in available
megabytes of drive space.
megabytes of drive space.
Capa %:
The remaining time for recording is shown as a
percentage of total drive space.
percentage of total drive space.
Event:
This shows the remaining number of events available for
recording and mixing.
recording and mixing.
5. Press [PLAY (DISPLAY)] to return to the Playlist display.
Peak indication