Roland VS-1824 用户手册
34
Chapter 2 Basic Operation
Setting the Internal Clock
The VS-1824 features an internal clock. When you record a
performance, a time stamp consisting of the time, day, and
month of recording is entered automatically. This allows you
to organize recordings by day, time, and order. Use the
following procedure to set the time and date in your VS-1824.
performance, a time stamp consisting of the time, day, and
month of recording is entered automatically. This allows you
to organize recordings by day, time, and order. Use the
following procedure to set the time and date in your VS-1824.
* The internal clock is battery-powered. Once you set this, the
values are remembered each time you turn the VS-1824 off.
However, if for any reason the time setting is in error, use the
same steps to reset the clock.
However, if for any reason the time setting is in error, use the
same steps to reset the clock.
1. Hold [SHIFT] and press [F5 (SYSTEM)].
The System menu icon appears.
If the System menu icon does not appear, press
[F6 (EXIT)].
[F6 (EXIT)].
2. Press [F2 (DATE)].
If “DATE” does not appear above [F2], first press [PAGE]
until “DATE” appears above [F2], then press [F2 (DATE)].
until “DATE” appears above [F2], then press [F2 (DATE)].
The System Date/Time screen appears.
fig.02-01a
3. Press [
], [
], [
], and [
] to move the
cursor and use the TIME / VALUE dial to change the
values for each setting.
values for each setting.
Date Edit
This sets the date—year, month, and day —in the Western
time format.
time format.
Date Format
This selects the way the date is displayed.
mm/dd/yyyy:
Month/Day/Year
dd/mm/yyyy:
Day/Month/Year
yyyy/mm/dd:
Year/Month/Day
MMM.dd’YY:
Month/Day/Year
dd MMM ‘YY:
Day/Month/Year
Time Edit
This sets the current time, displayed in a 24-hour format.
[F4 (Set)]:
Sets the date and time.
[F5 (Alarm)]:
(F6 (EXIT)]:
Exits the screen without setting the date
and time.
and time.
4. After changing the date and time values, press [F4 (Set)]
to confirm.
The set time becomes effective immediately.
5. Press [PLAY(DISPLAY)] to return to the Playlist display.