Roland VS-1824 用户手册

Chapter 5

The faders of two or more channels (inputs/tracks) can be 
assigned to groups, so that when the fader of any channel is 
operated, the fader levels (volume levels) of all channels in 
that group will be adjusted as well.

When fader group settings have been made, you can adjust 
the overall volume of a group while preserving the volume 
balance of the channels included in that group.

1. Press [SELECT (CH EDIT)] for the channel (input or 

track) you wish to assign to a fader group.

2. Press [PAGE] so that [F4] indicates “Group,” and then 

press [F4 (Group)].

3. Press [F6 (PRM.V)].

4. Use [

], [

], [

], and [

] to move the 

cursor, and use the TIME/VALUE dial to set the 
parameters.

Select the group (1–8) to which you wish to assign the 
fader. Channels for which the same number is selected 
will be assigned to the same group. Moving any fader 
within the group will adjust all faders assigned to that 
group.

If you select “Off,” the fader will not be assigned to any 
group, and will function normally.

5. Press [PLAY (DISPLAY)] to return to Play mode.

An image of fader group

(Faders cannot be moved.)