Roland SPD-S 用户手册
38
Chapter 1 Making a performance/Creating a patch
Patch Utilities Parameters
This section describes the steps for copying, exchanging and initializing patches and/or pad parameters.
PAD COPY
This copies all parameters from one pad to another.
1.
Set the following parameters.
Press PAGE buttons to change the parameter and press [-]/[+] to change the value.
2.
Press [>] to display “copy pad, sure?” Press [ENTER] to execute the copying, or press [<] to return to
Step 1.
While copying is in progress, “now processing..” is displayed. Upon completion of the procedure, “complete!” is displayed,
and you’re returned to the Patch mode.
and you’re returned to the Patch mode.
*MIDI note number and gate time parameters are not copied.
PAD EXCHANGE
This exchanges all parameters between one pad/trigger and another.
1.
Set the following parameters.
Press PAGE buttons to change the parameter and press [-]/[+] to change the value.
2.
Press [>] to display “exchg pad, sure?” Press [ENTER] to execute the exchange, or press [<] to return to
Step 1.
While exchanging is in progress, “now processing..” is displayed. Upon completion of the procedure, “complete!” is
displayed, and you’re returned to the Patch mode.
displayed, and you’re returned to the Patch mode.
*MIDI note number and gate time parameters are not exchanged.
Parameter
Value
Descriptions
Src
(Source)
(Source)
PAD 1–9,
TRIG IN 1–2,
FOOT SW 1–2
TRIG IN 1–2,
FOOT SW 1–2
Hit a pad to choose the copy source. Or, you can press [-]/[+] to select it.
* You can check which pad is specified by noticing which pad indicator is flashing, or
by viewing the display.
* Hold down [FUNC] and press [-]/[+] to change the patch to be copied from.
Dst
(Destina-
tion)
(Destina-
tion)
PAD 1–9,
TRIG IN 1–2,
FOOT SW 1–2
TRIG IN 1–2,
FOOT SW 1–2
Hit a pad to choose the copy destination. Or, you can press [-]/[+] to select it.
* You can check which pad is specified by noticing which pad indicator is flashing, or
by viewing the display.
* Hold down [FUNC] and press [-]/[+] to change the patch to be copied to.
Parameter
Value
Descriptions
Src
(Source)
(Source)
PAD 1–9,
TRIG IN 1–2,
FOOT SW 1–2
TRIG IN 1–2,
FOOT SW 1–2
Hit a pad to choose the exchange source. Or, press [-]/[+] to change it.
* You can check which pad is specified by noticing which pad indicator is flashing, or
by viewing the display.
* Hold down [FUNC] and press [-]/[+] to change the patch to be exchanged from.
Dst
(Destina-
tion)
(Destina-
tion)
PAD 1–9,
TRIG IN 1–2,
FOOT SW 1–2
TRIG IN 1–2,
FOOT SW 1–2
Hit a pad to choose the exchange destination. Or, press [-]/[+] to change it.
* You can check which pad is specified by noticing which pad indicator is flashing, or
by viewing the display.
* Hold down [FUNC] and press [-]/[+] to change the patch at the destination of the ex-
change.
SPDS_e.book 38 ページ 2004年4月19日 月曜日 午前9時58分