Roland RD-700SX 用户手册
14
Panel Descriptions
fig.rear
1. [POWER ON] Switch
2. AC Inlet
3. Wave Expansion Board Installation Slot
Remove the cover for installation of optional wave expansion boards
(SRX Series) (p. 15).
(SRX Series) (p. 15).
4. USB Connector
Connect your computer here to exchange Standard MIDI file and
setup file between the computer and the RD-700SX (p. 104).
setup file between the computer and the RD-700SX (p. 104).
5. PEDAL Jacks (DAMPER, FC1, FC2)
Connecting the pedal switch (DP series) provided with the RD-
700SX to the DAMPER jack allows you to use the switch as a damper
pedal.
700SX to the DAMPER jack allows you to use the switch as a damper
pedal.
With a pedal connected to the FC-1 or FC-2 jack, you can then assign
a variety of functions to the pedal (p. 70, p. 84).
a variety of functions to the pedal (p. 70, p. 84).
6. MIDI Connectors (IN, OUT1, OUT2, THRU)
Used for connecting external MIDI devices and for transmission of
MIDI messages (p. 60, p. 91, p. 101).
MIDI messages (p. 60, p. 91, p. 101).
7. OUTPUT L (MONO)/R Jacks
Provide output of the audio signals. These are connected to an amp
or other device. For monaural output use the L/MONO jack (p. 21).
or other device. For monaural output use the L/MONO jack (p. 21).
8. BALANCED OUT L/R Jacks
Connectors for balanced output of the audio signals. Connect to
mixers and other such gear (p. 21).
mixers and other such gear (p. 21).
9. PHONES Jack
Even when headphones are connected, sound will still be output
from the OUTPUT jacks.
from the OUTPUT jacks.
Rear Panel
1
2
3
4
5
6
7
8
9
RD-700SX_e.book 14 ページ ２００６年３月２３日 木曜日 午後２時５２分