Roland RD-700SX 用户手册

 

By pressing [EDIT] to make the indicator light, you can enter 
“Edit mode.” In Edit mode you can make detailed settings for 
various functions.
You can exit Edit mode by pressing [EDIT], extinguishing its 
indicator. 

 

 

When [NUM LOCK] is pressed, the button’s indicator lights up, 
enabling input of numerical values using the TONE SELECT 
buttons. The button indicators automatically light according to 
the values set.

 

fig.00-G08p

 

The CURSOR buttons are used for switching screens, and for 
moving to an item whose setting you want to change (by 
moving the cursor).

 

When arrow symbols (“ ” and “ ”) appear at the upper right of 
the display screen, it indicates that there are additional pages in 
the directions shown by the arrows.

You can switch screens with CURSOR [

] and [

].

 

fig.00-G09g

 

When more than one parameter is present in a screen, the name 
and value of the parameter to be changed is shown with a box 
around it. This box is referred to as the “cursor.” The cursor is 
moved with the CURSOR buttons.

 

fig.00-G10g

 

Additionally, when multiple parameters are presented 
horizontally in a row, as shown in the EXTERNAL screen, you 
can get the cursor to move more rapidly by holding down the 
CURSOR button that points in the direction you want the cursor 
to move while you also press the CURSOR button that points in 
the opposite direction.

 

fig.00-G11pj

fig.00-G12p

 

When changing settings values, you can use [DEC] and [INC], or 
the TONE SELECT buttons (numeric keys).

 

Pressing [INC] increases the value, and [DEC] decreases it. Keep 
the button pressed for continuous adjustment. For faster value 
increases, keep [INC] pressed down and press [DEC]. For 
decreasing value faster, keep [DEC] pressed down and press 
[INC].
Simultaneously pressing [DEC] and [INC] sets that parameter to 
the standard default value or switches it off.

 

When [NUM LOCK] is on (lit), numerical values can be input 
directly using the TONE SELECT buttons, which then serve as 
[0]–[9] numeric keys. When you enter the number, the value will 
blink. This indicates that the value has not yet been finalized. To 
finalize the value press [ENTER].
With some parameters, [NUM LOCK] may come on 
automatically, allowing you to input numerical values directly 
with the TONE SELECT buttons.

 

Only numerical values can be entered using the numeric keys. 
To switch the positive (+) or negative (-) signs for numerical 
values and make continuous changes in the numerical values, 
press [INC] or [DEC].

Cursor

RD-700SX_e.book 30 ページ ２００６年３月２３日　木曜日　午後２時５２分