Roland RD-700SX 用户手册
35
Performing with the Keyboard
Up to two optional wave expansion boards (SRX series) can be installed into the RD-
700SX.
700SX.
Use the following procedure when selecting tones stored on an wave expansion
board.
board.
fig.Q1-08p
1
Press ONE TOUCH [PIANO] or [E.PIANO].
This selects a single tone to be played over the entire keyboard.
2
Press EXPANSION [A] or [B] to make its indicator light.
fig.Q1-09g
If you hold down EXPANSION [A] or [B] for several seconds, the name of the
installed wave expansion board appears in the display (p. 17).
installed wave expansion board appears in the display (p. 17).
3
Press [NUM LOCK] to turn on the button indicator.
4
Press [INC]/[DEC], or press the TONE SELECT buttons to select the
Tone.
When using the TONE SELECT buttons to input Tone numbers, press [ENTER]
afterwards to set the number.
afterwards to set the number.
5
Play the keyboard, and you will hear the selected tone.
Selecting Wave Expansion Board Tones
4
2
3
1
For more on the wave
expansion board tone lists,
refer to “Patch List” (for RD-
700) and “Rhythm Set List”
(for RD-700) in the SRX Series
Owner's Manuals. However,
some of the tone names may be
displayed differently on the
RD-700SX. Refer to “Wave
Expansion Board Tone
expansion board tone lists,
refer to “Patch List” (for RD-
700) and “Rhythm Set List”
(for RD-700) in the SRX Series
Owner's Manuals. However,
some of the tone names may be
displayed differently on the
RD-700SX. Refer to “Wave
Expansion Board Tone
RD-700SX_e.book 35 ページ ２００６年３月２３日 木曜日 午後２時５２分