Roland RD-700SX 用户手册

下载
页码 180
 
54
 
Using the Convenient Functions in Performances
 
4
 
When the ZONE LEVEL sliders are moved, the harmonic bars move in 
the display, and the tone changes.
 
By pressing the ZONE SWITCH buttons on and off, you can adjust the sounds for 
other Feet.
If the cursor is moved to the value at the bottom of the screen, you can adjust the 
sounds for Feet with [DEC] and [INC].
 
5
 
Press CURSOR [
]/[
] to move the cursor to <Perc> and press 
[DEC]/[INC] to change the value.
 
Perc (Percussion) adds an attack-type sound to the beginning of the note to give the 
sound more crispness. The attack sound changes according to the value.
While the Tone Wheel screen is displayed, you can change the undulation rate of the 
Rotary effect with the Pitch Bend lever.
The Rotary effect is an effect that recreates the sound of the rotating speakers used 
to augment the sound of an organ.
The Rotary effect is set to alternately rotate more rapidly or slowly when the Pitch 
Bend lever is moved to the left and right; the direction is not fixed.
You can change the Feet assigned to each of the ZONE LEVEL sliders used in Tone 
Wheel mode.
 
1
 
Press [EDIT], getting the indicator to light.
 
The Edit Menu screen appears.
 
fig.Q2-13g
 
2
 
Press CURSOR [
]/[
] to select “2.Control.”
 
3
 
Press [ENTER] to display the Edit screen.
 
Settings
Description
 
OFF
No percussion is added.
2nd
Percussion sounds at a pitch one octave above that of the key 
pressed.
3rd
Percussion sounds at a pitch an octave and a fifth above that 
of the key pressed.
Slow
The percussion’s attenuation time is lengthened. This softens 
the sense of attack.
Fast
The percussive sound will decay more quickly. This gives 
more of a sense of attack for a sharp sound.
 
Changing the Undulation of the Organ Tone 
(Rotary Effect)
Changing the ZONE LEVEL Slider Feet Assignments 
(Harmonic Bar)
The Percussion is applied only 
to the UPPER Tone.
When percussion is on, the 1’ 
pitch will not be produced 
(p. 53).
The settings changed here are 
stored to each Tone. Even 
when you exit from Tone 
Wheel mode, you can press 
[ORGAN] to select the Tone 
with the changed settings.
This Pitch Bend Lever setting 
is effective only in the Tone 
Wheel screen.
RD-700SX_e.book 54 ページ 2006年3月23日 木曜日 午後2時52分