Roland Fantom-Xa 用户手册
206
Connecting to Your Computer via USB
The Fantom-Xa has two modes of USB functionality:
storage mode
for transferring files, and
MIDI mode
for sending and receiving MIDI
messages. You must switch between these two modes on the
Fantom-Xa; they cannot be used simultaneously.
Fantom-Xa; they cannot be used simultaneously.
The USB mode (file transfer/MIDI communication) must be
switched before you connect the Fantom-Xa with your
computer.
switched before you connect the Fantom-Xa with your
computer.
Each mode can be used with the following operating systems.
*
This may not work correctly with some types of computer.
You must switch the Fantom-Xa to USB Storage mode before
you connect the Fantom-Xa and your computer with a USB
cable.
you connect the Fantom-Xa and your computer with a USB
cable.
1.
Press [MENU] to open the Top Menu window.
2.
Press
or
to select “1. System,” and then press
[ENTER].
The System Menu window appears.
3.
Press [F1 (GENERAL)] and then press [F4 (USB)].
The SYSTEM SETUP USB screen appears.
4.
Press
to move the cursor to “USB Mode.”
5.
Use the VALUE dial or [INC] [DEC] to select “STORAGE.”
A message will ask you for confirmation.
6.
To switch the USB mode, press [F6 (OK)].
*
If you decide not to switch, press [F5 (CANCEL)]
USB Storage mode will be selected.
fig.SYSTEM-USB
7.
If you want the Fantom-Xa to start up in USB Storage mode
the next time it is powered up, press [F6 (WRITE)] to save
the System settings.
the System settings.
8.
Press [EXIT] to return to the previous screen.
For details on operations in USB Storage mode, refer to
You must switch the Fantom-Xa to MIDI mode before you
connect the Fantom-Xa and your computer with a USB cable.
connect the Fantom-Xa and your computer with a USB cable.
*
If you’ve selected USB MIDI mode, nothing can be received from the
MIDI IN connector.
MIDI IN connector.
1.
Press [MENU] to open the Top Menu window.
2.
Press
or
to select “1. System,” and then press
[ENTER].
The System Menu window appears.
3.
Press [F1 (GENERAL)] and then press [F4 (USB)].
The SYSTEM SETUP USB screen appears.
4.
Press
to move the cursor to “USB Mode.”
5.
U8pears.98LUE dial or [INC] [DEC] to select “MIDI.”
A message will ask you for confirmation.
6.
To switch the USB mode, press [F6 (OK)].
To switch thes3849.0001 Tm( )Tj-11.203 -54.641 TD5l421uW3, pr6e1.1CANCE (U.3461 TD( )Tj1s [F.73o switch th(6.)Tj/ [F1 4l as8