Roland AT 5 用户手册

If you want to hook up an external instrument to the AT-5, 
then this chapter is for you.

You can connect external MIDI instruments to these 
connectors to exchange performance information.

You can connect a damper pedal (sold separately) and use it 
to produce a lingering effect for the notes you play on the 
keyboard.

Using this jack, you can connect other sound generating 
devices or audio equipment and play sounds from other 
devices through the AT-5’s speaker.

You can some awesome sounds if you connect speakers or 
other audio equipment to these jacks. You can also hook up a 
cassette recorder to record your performances.

You can connect audio equipment using audio cables (sold 
separately) and play the sounds from the AT-5 through the 
speakers on the connected equipment or record your 
performances on a tape recorder or other recording device.
If the output of the connected device is monaural, you must 
use the L (Mono) jack.

Use an audio cable to connect the input jack on the audio set 
or amp mixer to one of the output jacks on the AT-5. Use an 
audio cable with a standard plug. When purchasing an audio 
cable, please consult the vendor where you bought the AT-5.

You can connect another sound module, such as audio 
equipment or an electronic instrument using audio cables 
(sold separately) and play the sounds from the connected 
device through the speakers on the AT-5.
If the input of the connected device is monaural, you must 
use the L (Mono) jack.

■ Making the Connections

To prevent malfunction and/or damage to speakers or other 
devices, always turn down the volume, and turn off the 
power on all devices before making any connections.

● After use, follow the steps below to switch off the power.