Roland DR-3 用户手册

下载
页码 128
87
Chapter 8 Creating and Performing Songs ([SONG])
Ch
ap
ter
 8
Setting a Specified Segment for Playing 
Repeatedly
This sets the specified segment for playing repeatedly 
(Loop Play).
1. Select the song to play, then press [EDIT].
The Edit Menu screen appears.
2. Select a <SONG>, then press [ENTER].
3. Press [
] to select a <LoopStart> or a 
<LoopEnd>, then press [ENTER].
The measure where Loop Play begins is set 
with “LoopStart”; the measure where Loop 
Play stops is set with the “LoopEnd” setting.
fig.08-31d
4. Turn the VALUE dial to set the starting or 
ending measure for Loop Play.
5. When you press [EXIT], the setting is 
changed, and you’re returned to the 
previous screen.
■ Playing Multiple Songs 
Continuously (Song Chain)
You can specify the song number of the song that 
you want to have played right after the currently 
selected song, when it is played. By setting in 
each song the number of the song that is to follow 
it, you can achieve continuous playback of up to 
100 songs.
You can also have the performance of any 
particular song(s) be repeated.
fig.08-chain
1. Select the song to play, then press [EDIT].
The Edit Menu screen appears.
2. Select a <SONG>, then press [ENTER].
3. Press [
], select a <Chain>.
fig.08-35d
4. Turn the VALUE dial to select the value.
5. When you press [EXIT], the setting is 
changed, and you’re returned to the 
previous screen.
*
Depending on its settings, there may be some delay for 
the TSC (p. 51) to change, if the song is switched while 
Song Chain is in progress.
Value
Description
OFF
Plays back the currently selected song 
one time and then stops.
REPEAT
Playback of the song(s) is repeated.
S001–
S100
The selected song is played back, and 
is followed by playback of the next 
specified song.
Song 001
Song Chain: 002
Song 002
Song Chain: 003
Song 003
Song Chain: OFF