Roland FR-5 用户手册

 Solving MIDI buffer problems

V-Accordion 

r

This parameter allows you to specify how many data 
the FR-7/FR-5’s bellows may transmit for expression 
purposes (see also “Expression” on p. 88). As long as the 
external sequencer you work with does not display a 
“MIDI buffer overflow” message, you can leave its set-
ting at “High”. If, however, the bellows’ data amount is 
too much for the receiving sequencer (because such 
data are transmitted on several channels simulta-
neously), select a different setting. In that case, the 
amount of data will be reduced. This leads to a coarser 
resolution, and maybe even audible steps, but at least, 
your sequencer will be able to record the data. If 
“Medium” still generates too many data, select “Low”. 

“TX” means that this parameter only applies to data 
sent by the FR-7/FR-5. Its own MIDI buffer is big 
enough to receive high-resolution data.

(1) Press and hold the [EXIT÷JUMP] button until the 

display looks as follows:

(2) Press register [12] to specify the function group.

(3) Press register [3] to select the following page:

(4) Rotate the [DATA÷ENTER] knob to select “High” 

(high resolution), “Medium”, or “Low” (low resolu-
tion).

(5) Press [EXIT÷JUMP] to return to the Main page.

(6) See “Saving your changes” on p. 82 if you want to 

save these settings.
If you don’t save them, they are reset when you 
switch off the FR-7/FR-5.