Roland Fantom G6 用户手册
38
Recording Sound from a Mic or Guitar
Here’s how to record from a mic or guitar connected to the Fantom-G.
Connect your mic, guitar, or portable audio player as shown below.
Connecting your equipment
Connecting a mic
Connecting a guitar or bass
Connecting a portable audio player
When using a condenser mic that
requires a balanced (XLR) connection
that supplies phantom power,
select the “PHANTOM ON” setting.
requires a balanced (XLR) connection
that supplies phantom power,
select the “PHANTOM ON” setting.
When using a dynamic mic etc. that
has a phone plug,
select the “PHANTOM OFF” setting.
has a phone plug,
select the “PHANTOM OFF” setting.
For a guitar or bass,
select the “GUITAR (Hi-Z)” setting.
select the “GUITAR (Hi-Z)” setting.
When connecting a guitar or bass directly, connect it to the
MIC/GUITAR jack.
MIC/GUITAR jack.
When connecting a portable audio player, stereo system, or CD
player, use audio cables to connect its output jacks (LINE OUT
jacks or AUX OUT jacks, etc.) to the Fantom-G’s LINE input jacks.
player, use audio cables to connect its output jacks (LINE OUT
jacks or AUX OUT jacks, etc.) to the Fantom-G’s LINE input jacks.
Connecting a digital audio source
When digitally connecting equipment such as a DAT, use a
coaxial cable to connect its output jack (e.g., DIGITAL OUT
jack) to the Fantom-G’s DIGITAL AUDIO IN jack.
coaxial cable to connect its output jack (e.g., DIGITAL OUT
jack) to the Fantom-G’s DIGITAL AUDIO IN jack.
You must leave the phantom power turned off unless you’ve
connected a condenser mic that requires a phantom power supply.
Supplying phantom power to a dynamic mic or audio playback device
will cause malfunctions. For details on the specifications of your mic,
refer to the owner’s manual for your mic. (The Fantom-G’s phantom
power supply is DC 48V, 10 mA maximum.)
connected a condenser mic that requires a phantom power supply.
Supplying phantom power to a dynamic mic or audio playback device
will cause malfunctions. For details on the specifications of your mic,
refer to the owner’s manual for your mic. (The Fantom-G’s phantom
power supply is DC 48V, 10 mA maximum.)
You cannot connect a record player (turntable) directly to the Fantom-G.
If you want to connect a record player, you must use an audio amp that’s
equipped with a record player input, or connect a phono equalizer
between the record player and the Fantom-G.
If you want to connect a record player, you must use an audio amp that’s
equipped with a record player input, or connect a phono equalizer
between the record player and the Fantom-G.
When an external device is connected to the DIGITAL AUDIO IN jack,
and you disconnect the cable or power-off the external device, noise
may subsequently be heard in the input from DIGITAL AUDIO IN. If this
occurs, correctly re-connect your external device, or turn off the
Fantom-G’s [MIX IN] switch.
and you disconnect the cable or power-off the external device, noise
may subsequently be heard in the input from DIGITAL AUDIO IN. If this
occurs, correctly re-connect your external device, or turn off the
Fantom-G’s [MIX IN] switch.
Mics with phone plugs
Mics with balanced (XLR) plugs
Use this to adjust
the recording level.
the recording level.
Min
Max
Use this to adjust
the recording level.
the recording level.
Min
Max
Use this to adjust
the recording level.
the recording level.
Min
Max
The Fantom-G provides a balanced (XLR/TRS) type
connector that is wired as shown in the illustration.
Check the wiring of your device before connecting it.
connector that is wired as shown in the illustration.
Check the wiring of your device before connecting it.
Fantom-G_q_e.book 38 ページ ２００８年２月４日 月曜日 午後２時２６分