Roland HP107 用户手册

Chapter 2. Performance

■

Changing the metronome volume

The volume of the metronome can be adjusted, with ten volume levels available.

While holding down the [Metronome/Count In] button, press the [-] or

[+] button.

The currently specified volume will be displayed.

Continue to hold down the [Metronome/Count In] button, and press the [-] or [+]

button to sound the metronome, and change the volume.

fig.disp-metrovol

Splitting the Keyboard Into Two Sections for

Four-Hand Performances (Twin Piano Mode)

You can divide the keyboard into two separate sections, allowing two people to

perform in the same registers.

While holding down the [Split] button and press the [Piano] button.

The [Split] button’s indicator will light, and Twin Piano Mode is switched on.

The following occur when Twin Piano Mode is switched on:

• The keyboard is divided into two separate sections, and the pitch

changes.

• The right pedal now functions as the damper pedal for the right

keyboard section, and the left pedal functions as the damper pedal for
the left keyboard section.

• The center pedal now functions as the Sostenuto pedal for the right

keyboard section.

• If recording is in progress or the instrument is in recording standby,

recording is stopped or recording standby is cancelled. The [Rec] button
is disabled while Twin Piano Mode is active.

• If the Split function happens to be on, it is switched off.
• The same tone and effects are used on both the left and right sides. If the

piano is in Split Play before switching Twin Piano Mode on, then the
tone selected for the right hand in Split Play is used.

* The damper resonance function is not operational in Twin Piano Mode.

To exit the function, while holding down the [Split] button and press the

[Piano] button.

This is set to “4” when the

instrument is turned on.

When the metronome volume

is set to “0,” the metronome

sound does not play.

HP107_e.book 33 ページ２００５年７月２５日　月曜日　午後４時５０分