Roland FP-3 用户手册

Case

Cause/What to do

No Power

Is the power cord properly connected? (p. 8)

No Sound

nected device turned all the way down?

No Sound (With a 

MIDI Device Con-

nected)

Is the MIDI cable connected and plugged in 

correctly? (p. 42)

Does the MIDI channel match the connected 

instrument? (p. 43)

No Sound, Even 

When Key is 

Pressed

Is Local Off selected? When Local Control is 

set to OFF, no sound is produced by playing 

the keyboard. Set Local Control to “ON”

The Volume of the 

Keyboard is Too 

Low

Is the volume balance for the keyboard 

No Sound From 

the Left Side

No sound from the left side is produced if the 

[Split] button’s indicator is on while the 

Chord part is playing.

Two Sounds are 

Produced When 

the Keyboard is 

Played

When the FP-3 is connected to an external 

sequencer, set it to the Local OFF mode (p. 

43). Alternatively, set SOFT THRU on the 

sequencer to “OFF.”

Not All Sounds Are 

Played

The FP-3 has a maximum polyphony of 64 

voices. When playing together with a song or 

Rhythm along with heavy use of the damper 

pedal, the performance data may exceed the 

number of available voices, and as a result, 

some notes or sounds played on the key-

board may not sound.

The Keyboard or 

Song Register or 

Pitch is Off

Have you set Transpose? (p. 22)

Are the settings for the Temperament (p. 40) 

correct?

Is the setting for Master Tuning correct? 

Rhythm Does Not 

Sound

Is the volume balance for the Rhythm turned 

Chords Not Rec-

ognized in the Left 

Side When Playing 

Rhythms

Is the [Split] button’s indicator off (p. 31) 

When the [Split] button’s indicator is off 

while the Chord part is playing, the chord 

progression then proceeds automatically.

Song Doesn’t Play 

Back

Is the [Song] button indicator lit in green? 

Songs cannot be played back when the [Song] 

button’s indicator is on. Press the [Song] but-

ton, getting its indicator to light.

The internal songs cannot be played back 

while recorded performance data remains in 

the FP-3’s memory. Try playing back the song 

after deleting the performance data.

The Volume of 

Internal Song is 

Too Low

Is the volume balance for the Rhythm (and 

internal song) turned all the way down? 

Only the Sound of 

a Particular Instru-

ment in a Song 

Does Not Play

Is Track Mute on? (p. 13) 

If the button’s light is out when you hold 

down the [Play] button, the music on that 

track is not heard. Press the track button so 

the light is illuminated.

Cannot Select 

Tone or Rhythm

Is the [Song] button indicator flashing in red?

When the [Song] button indicator flashes in 

red it means that setting of functions is in 

progress. Press the [Song] button once more, 

then select the tone or Rhythm.

Cannot Record

Have you selected which of the Track Buttons 

to be recorded? (p. 36)

Tempo of 

Recorded Song or 

Metronome is Off

When you select for recording an internal 

song that features tempo changes, the tempos 

of Performances recorded on other tracks are 

altered along with these changes. In addition, 

the Metronome tempo is also changed the 

same way.

When you record additional material 

without erasing the previously recorded 

sounds, the song is recorded at the ini-

)

Recorded Perfor-

mance is Erased

Performances that have been recorded are 

erased when the power for the FP-3 is turned 

off or when a song is selected. Once erased, 

Performances cannot be recovered.

Case

Cause/What to do

If you think there’s a problem, read this first.