Roland FR-7 用户手册

 11.12 FreeBass Reg. on current Set

V-Accordion 

r

• Rotate the [DATA÷ENTER] knob (or use the [UP]/

[DOWN] buttons) to select “Bass”.

• Press the [DATA÷ENTER] knob to confirm your selec-

tion.

• Use the [DATA÷ENTER] knob or the [UP]/[DOWN] but-

tons to select “ALL”.

• Press the [DATA÷ENTER] knob to confirm your selec-

tion.
The display now looks as follows:

• Use the [DATA÷ENTER] knob or the [UP]/[DOWN] but-

tons to select the Set that should contain your 
changed version(s).
Change this setting only if you do not want to save 
your settings to the current Set.

• Press the [MENU÷WRITE] button to save your 

changes. The display briefly shows a confirmation:

• Press the [EXIT÷JUMP] button to return to the Main 

page.

This page allows you to set six 
parameters for all Free Bass reg-
isters of the currently selected 
Set simultaneously. You will 
notice that it is very similar to 
the “Bass Reg. on current Set” parameter above, except 
that there are fewer reeds.

Here’s how to take advantage of this environment:

(1) Select the Set whose Free Bass registers you want 

to edit simultaneously.

(2) Select this parameter (“11.12 FreeBass Reg. on 

current Set”).
See p. 38 for the two possible approaches (one via 
the JUMP menu, the other using the registers).

(3) Turn the [DATA÷ENTER] knob to select the parame-

ter to be edited for all Free Bass registers.

The possibilities are:
Reed: Reed ALL, Reed 16’, Reed 8’
Volume: Vol ALL, Vol 16’, Vol 8’
Others: Noise, Noise Vol, Reed Growl, Growl Vol

As you see, this step may involve two actions:
(a) You first need to decide which parameter type 
you want to edit (“Reed”, “Vol”, “Noise”, “Noise Vol”, 
“Reed Growl”, or “Growl Vol”);
(b) Select the reeds your change should apply to (only 
for “Reed” and “Vol”).

Here’s an example: to set the reed type of all 16’ 
reeds (one per register) of the current Set to 
“Steierische”, turn the [DATA÷ENTER] knob until “Reed 
16’” is displayed, then proceed with the next step.

(4) Press the [DATA÷ENTER] knob to select “VALUE”, 

then rotate the [DATA÷ENTER] knob to select the 
desired setting.
The possibilities depend on the choice you made in 
step (3) above.

Note: Reeds that are currently off (see “4.2 Register” on p. 53) 
adopt the new setting but are not switched on by this opera-
tion.

(5) Press [EXIT÷JUMP] to return to the Main page and 

try out all 7 Free Bass registers.

Note: Do not change Sets at this stage, because that would 
erase the changes you have just made.

(6) If you like your new settings, save them:

• Press and hold the [MENU÷WRITE] button until the 

following page appears:

Parameter

Setting range

Reed

Bandoneon, I-Folk, I-Folk2, Classic, Cajun, 
Jazz, F-Folk, D-Folk, Organetto, F-Folk2, 
Classic2, Studio, Tradition, Steierische, 
Trikitixa

Vol

Off, –40~Std~40

Noise

Bandoneon, I-Folk, I-Folk2, Classic, Cajun, 
Jazz, F-Folk, D-Folk, Organetto, F-Folk2, 
Classic2, Studio, Tradition, Steierische, 
Trikitixa

Noise Vol

Off, –40~Std~40

Reed Growl

Bandoneon, I-Folk, I-Folk2, Classic, Cajun, 
Jazz, F-Folk, D-Folk, Organetto, F-Folk2, 
Classic2, Studio, Tradition, Steierische, 
Trikitixa

Growl Vol

Off, –40~Std~40