Roland CDX-1 用户手册
127
Recording/playing back a performance
Recording/playing back a
performance
Increasing the free space on a CD-RW disc
—Optimize Disc
—Optimize Disc
When you perform overdubbing (p. 124) or punch-in/out (p. 121), the data that you
rewrite (replace) actually remains on the CD-RW disc. In some cases, this unwanted
data may occupy a significant amount of space on the CD-RW disc. This will cause
the time available for recording to be less than it should be.
rewrite (replace) actually remains on the CD-RW disc. In some cases, this unwanted
data may occupy a significant amount of space on the CD-RW disc. This will cause
the time available for recording to be less than it should be.
By executing
Optimize
you can erase the unwanted data from the CD-RW disc,
increasing the amount of available space on the CD-RW disc.
1. Press [UTILITY].
The Menu are displayed as icon.
fig.42-11
2. Press CURSOR [
] to select the
CD-R/RW Disc icon.
3. Press [YES/ENTER].
The CD-R/RW Disc Menu are displayed as icon.
fig.42-11
4. Press CURSOR [
] to select the
Optimize Disc icon.
5. Press [YES/ENTER].
fig.42-11a
A message of “You can’t UNDO this
function.” appears.
function.” appears.
6. If you press [YES/ENTER], Optimize will be executed.
The display will show a message of “Completed.” and the Basic screen will reappear.
If you press [NO/EXIT], the display of step 3 reappears without executing Optimize.
Depending on the situation, an
appreciable length of time may
be required for Optimize to be
completed. This is not a
malfunction. While the
processing bar appears, do not
turn off the power with
unplugging the AC adaptor.
appreciable length of time may
be required for Optimize to be
completed. This is not a
malfunction. While the
processing bar appears, do not
turn off the power with
unplugging the AC adaptor.
If you turn off the power
during the Optimize
operation, the CD-RW disc
may become unusable, or the
drive may be damaged.
during the Optimize
operation, the CD-RW disc
may become unusable, or the
drive may be damaged.
After you execute Optimize, it
is not possible to press
[UNDO/REDO] (p. 138) to
revert to the state before
executing Optimize.
is not possible to press
[UNDO/REDO] (p. 138) to
revert to the state before
executing Optimize.