Roland CDX-1 用户手册

By changing the connections of the insert effect, you can meet the needs of a wide 
variety of situations. For example, you can apply effects to the playback of specific 
audio tracks or audio sample pads, or adjust the sound during mixdown (p. 133)

The Menu are displayed as icon.

fig.5-13

fig.5-14

The Insert Mode setting screen appears.

fig.5-15

You will hear the sound that passes through 
the insert effect. The sound that passes 
through the insert effect (the same sound that 
you hear) will also be recorded/sampled. 
Normally you will use this setting.

fig.5-16

You will hear the sound that passes through 
the insert effect. The sound prior to passing 
through the insert effect (i.e., the original 
sound) will be recorded/sampled. Use this 
setting when you wish to try various effects 
after recording the sound.

fig.5-17

The insert effect will be applied to the audio 
tracks. Use this setting when you wish to try 
various effects after recording the direct 
sound (i.e., the sound not processed by the 
effect), or when you wish to apply an effect to 
a specific audio track.

fig.5-18

Use this setting when you wish to adjust the 
tone during mixdown, or when you wish to 
apply an effect to the entire sound, such as 
during resampling (p. 63).

By default, the insert effect is 
inserted immediately after the 
input source
(“INPUT (NORMAL)”).

AUDIO TRACK (REC)

PAD (REC)

Input level is always same 
regardless to the position of 
REC LEVEL knob in case of 
“INPUT (REC DRY)” is 
selected.