Roland CDX-1 用户手册
14
Using [STATUS] to select the track whose
parameters you want to adjust
parameters you want to adjust
When you want to adjust an audio track's mixer settings (pan, equalizer), or loop
effect settings, you can also press [STATUS] for that audio track to select it directly.
effect settings, you can also press [STATUS] for that audio track to select it directly.
Setting the left/right position (pan) of each audio track
1. Hold down TRACK EDIT [PAN] and press AUDIO TRACK [STATUS] that you
want to adjust.
fig.43-01
The pan setting screen appears.
2. Turn the TIME/VALUE dial to set the pan.
3. Press [DISPLAY] to return to the Basic screen.
Adjusting the tone of each audio track
1. Hold down TRACK EDIT [EQ] and press AUDIO TRACK [STATUS] that you
want to adjust.
fig.43-02
The equalizer setting screen appears.
2. Press CURSOR [
] [
] to move the cursor to the line of the parameter you
want to adjust.
3. Turn the TIME/VALUE dial to change the value.
➔ For details on the parameters, refer to “Mixer effect parameter functions”
(Owner’s Manual; p. 174).
4. Press [DISPLAY] to return to the Basic screen.
Editing the loop effect settings
Chorus/delay/doubling
1. Hold down LOOP EFFECT [DELAY], and press AUDIO TRACK [STATUS] that
you want to adjust.
fig.43-02
The equalizer setting screen appears.
2. Turn the TIME/VALUE dial to adjust the send level.
3. Press [DISPLAY] to return to the Basic screen.
Reverb
1. Hold down LOOP EFFECT [REVERB], and press AUDIO TRACK [STATUS] that
you want to adjust.
fig.43-02
The equalizer setting screen appears.
2. Turn the TIME/VALUE dial to adjust the send level.
3. Press [DISPLAY] to return to the Basic screen.
In step 1, you can hold down
[DELAY] and press PAD
[STATUS] to select “PAD.”
[DELAY] and press PAD
[STATUS] to select “PAD.”
For details on setting the effect
parameters, refer to “Editing
the loop effect settings”
(Owner’s Manual; p. 145–146).
parameters, refer to “Editing
the loop effect settings”
(Owner’s Manual; p. 145–146).
In step 1, you can hold down
[REVERB] and press PAD
[STATUS] to select “PAD.”
[REVERB] and press PAD
[STATUS] to select “PAD.”