Roland FR-7/FR-5 用户手册

Setting up | First steps

r

FR-7/FR-5 V-Accordion

At first, the FR-7/FR-5 is configured to start up in 
“Easy” mode. In that mode, only the main parameters 
can be selected. It has the advantage that you do not 
feel overwhelmed by the FR-7/FR-5’s possibilities. The 
downside, however, is that there are certain (albeit 
rather specialized) parameters you cannot even select.

To use the full potential of your FR-7/FR-5, you need to 
select “Full” mode:

(1) Switch on the FR-7/FR-5.

See “Switching the power on and off” on p. 15. The 
display now looks more or less as follows:

Let us agree to call this page the “Main page”.

(2) Press and hold the [EXIT÷JUMP] button until the 

display looks as follows:

(3) Press registers [8] and [2] to jump to the following 

page:

(4) Press the [DATA÷ENTER] knob.

(5) Rotate the [DATA÷ENTER] knob or press the [UP]/

[DOWN] buttons to select either “Full” (show all 
parameters) or “Easy” (show only the main param-
eters).

(6) Press [EXIT÷JUMP] to return to the main page.

The FR-7/FR-5 asks you whether you want to save your 
changes:

“YES” is selected by default. To save your changes, pro-
ceed as described below. (If you don’t want to save 
them, turn the [DATA÷ENTER] knob to select “NO”, then 
press the [DATA÷ENTER] knob.)
To save your changes:

(7) Press the [DATA÷ENTER] knob. The display now 

responds with:

Note: The GLOBAL page shows all parameters that are saved 
to the Global memory (there is only one such memory).

(8) Press the [MENU÷WRITE] button to save your 

changes. The display briefly shows a confirmation:

Note: If you selected “NO”, the edited Global settings will be 
used until you switch off the FR-7/FR-5 (or change them 
again).