Roland FR-7/FR-5 用户手册

 3.6 Bellows Detune

V-Accordion 

r

(Off, Low, Standard, High, 
Default setting: Standard) This 
parameter further adds to the 
realism of the sounds emulated 
by your FR-7/FR-5. Here, you 
can specify how strongly the pitch of the simulated 
Bass reed(s) changes when you open or close the bel-
lows faster than usual.

If the “Standard” setting seems too mild, try “High”. If it 
is too strong, use “Low”. If you do not want any detun-
ing effect, select “Off”. The most convincing setting 
usually depends on the selected instrument(s) (see 
“3.1 Reed Type”).

(0~127 for all three) Use these 
parameters to set the Reverb, Chorus 
or Delay send level (how much effect 
should be applied to the Bass section). 
The higher the value you set, the 
more the Bass section will be pro-
cessed by the effect in question.

The other sections (Treble, Free Bass, 
etc.) have the same parameters, so 
that you can create a sound image 
with various “levels” (foreground, background).

These pages contain a series of 
MIDI parameters for the 
selected register you need to set 
one by one. One page allows 
you to specify which MIDI mes-
sages the bass notes (i.e. the two 
or three button rows closest to 
the bellows) should transmit, 
the other does the same for the 
chords (the remaining buttons in the Bass section).

See page 72 for details about the MIDI parameters. 
These parameters are saved along with all other Set 
parameters, which allows you to use different MIDI set-
tings for each Set – and even each register within a Set.