Roland FR-7/FR-5 用户手册

 9.7 Bulk Dump ALL, 9.8 Bulk Dump SET

V-Accordion 

r

(2) Press the [DATA÷ENTER] knob to select the “FROM” 

parameter, then turn it to select the Set whose set-
tings you wish to copy.
By default, the FR-7/FR-5 selects the number of the 
Set you are currently using.

(3) Press the [DATA÷ENTER] knob to select the “TO” 

parameter, then turn it to select the Set memory 
to which the settings should be copied.
Carefully check whether you have selected the cor-
rect Set memories, then…

(4) Press [MENU÷WRITE] to copy the settings.

The display confirms this operation:

These two functions allows you to transmit all of the 
FR-7/FR-5’s settings or just the settings of the currently 
selected Set to an external MIDI device (which could be 
a second FR-7/FR-5). See page 75 for details.

This function allows you to load 
the settings of one of the pre-
programmed Sets into the cur-
rently selected Set memory.
Warning: This command over-
writes all settings of the current Set, i.e. the parameters 
of the following sections: 2. Treble Edit, 3. Bass Edit, 4. 
Free Bass Edit, 5. ORC Bass Edit, 6. Orchestra Edit and 7. 
Set Common.

It can come in handy, though, if you want to return to 
one of the factory Sets and use it as is or as a starting 
point for new edits. 

(1) On the page shown above, press the [DATA÷ENTER] 

button.
The display now changes to:

(2) Rotate the [DATA÷ENTER] knob to select the factory 

Set you want to load.

(3) Press [MENU÷WRITE] to load the settings.

The display confirms this operation: