Roland FR-7/FR-5 用户手册
Setting up | First steps
18
r
FR-7/FR-5 V-Accordion
Selecting Easy or Full mode
At first, the FR-7/FR-5 is configured to start up in
“Easy” mode. In that mode, only the main parameters
can be selected. It has the advantage that you do not
feel overwhelmed by the FR-7/FR-5’s possibilities. The
downside, however, is that there are certain (albeit
rather specialized) parameters you cannot even select.
“Easy” mode. In that mode, only the main parameters
can be selected. It has the advantage that you do not
feel overwhelmed by the FR-7/FR-5’s possibilities. The
downside, however, is that there are certain (albeit
rather specialized) parameters you cannot even select.
To use the full potential of your FR-7/FR-5, you need to
select “Full” mode:
select “Full” mode:
(1) Switch on the FR-7/FR-5.
See “Switching the power on and off” on p. 15. The
display now looks more or less as follows:
display now looks more or less as follows:
Let us agree to call this page the “Main page”.
(2) Press and hold the [EXIT÷JUMP] button until the
display looks as follows:
(3) Press registers [8] and [2] to jump to the following
page:
(4) Press the [DATA÷ENTER] knob.
(5) Rotate the [DATA÷ENTER] knob or press the [UP]/
[DOWN] buttons to select either “Full” (show all
parameters) or “Easy” (show only the main param-
eters).
parameters) or “Easy” (show only the main param-
eters).
(6) Press [EXIT÷JUMP] to return to the main page.
The FR-7/FR-5 asks you whether you want to save your
changes:
changes:
“YES” is selected by default. To save your changes, pro-
ceed as described below. (If you don’t want to save
them, turn the [DATA÷ENTER] knob to select “NO”, then
press the [DATA÷ENTER] knob.)
To save your changes:
ceed as described below. (If you don’t want to save
them, turn the [DATA÷ENTER] knob to select “NO”, then
press the [DATA÷ENTER] knob.)
To save your changes:
(7) Press the [DATA÷ENTER] knob. The display now
responds with:
Note: The GLOBAL page shows all parameters that are saved
to the Global memory (there is only one such memory).
to the Global memory (there is only one such memory).
(8) Press the [MENU÷WRITE] button to save your
changes. The display briefly shows a confirmation:
Note: If you selected “NO”, the edited Global settings will be
used until you switch off the FR-7/FR-5 (or change them
again).
used until you switch off the FR-7/FR-5 (or change them
again).