Crate Amplifiers V50-112 用户手册

V50-112 Tube Guitar Amplifier with Reverb

www.crateamps.com

@2007 LOUD Technologies Inc.

16220 Wood-Red Road NE • Woodinville, WA 98072

Part No. 0024425 Rev. A1 04/07

V50-112 TECHNICAL SPECIFICATIONS

Output Power Rating

50 W rms @ 5% THD, 8 ohm load, 120 VAC

Signal-to-Noise Ratio

70 dB, Typical (Clean Ch only)

Gain

Overdrive Ch

98 dB, all controls @ 10

Clean Ch

58 dB, all controls @ 10

Treble: 12 dB range @ 6 kHz

Middle: 10 dB range @ 1 kHz

Bass: 8 dB range @ 150 Hz

Boost

10 dB @ 900 Hz

Presence

8 dB range @ 10 kHz

Speaker Specs

12", 50 W, 8 ohm, 1.75" voice coil diameter,

30 oz magnet

Extension Speaker

8 ohms minimum nominal impedance

Preamp Tubes

(3) 12AX7A

Power Tubes

(2) 6L6GC

Power Requirements

90-132 VAC, 60 Hz, 150 VA

220-240 VAC, 50 Hz, 150 VA

Size (H x W x D)

19.0 in/48.3 cm x 24.0 in/61.0 cm x

11.0 in/27.9 cm

Weight

48.5 lb/22.0 kg

The V50-112 is covered with a durable fabric-backed vinyl material. Wipe it clean with a lint-free cloth.
Never spray cleaning agents onto the cabinet. Avoid abrasive cleansers which would damage the finish.

Crate continually develops new products, as well as improves existing ones. For this reason, the specifications

and information in this manual are subject to change without notice.

“Crate” is a registered trademark of LOUD Technologies Inc. All other brand names mentioned are trademarks or

registered trademarks of their respective holders and are hereby acknowledged.

Service Information

If you are having a problem with your V50-112, you can go to our website (www.crateamps.com)
and click on Support for service information, or call 1-800-898-3211 during business hours
(7 am to 5 pm PST, Monday-Friday). If you are outside of the U.S., contact your local distribu-
tor for technical support and service.