Edirol UA-1000 用户手册

 

fig.rear

 

Connect the included AC cable here. Plug in the cable firmly so that it does not fall out. For details on current 
consumption, refer to 

 

 

Connect these to the MIDI connectors of your MIDI device to receive or transmit MIDI messages.

 

Use these jacks to synchronize the UA-1000 with a digital recorder.

If you want to synchronize to WORD CLOCK, you must turn on the external clock switch.

 

Use a USB cable to connect the UA-1000 to your computer.

 

Use these jacks to input digital audio from a CD/MD/DAT, etc. If a digital device is connected to the optical digital 
input jack, the optical digital input jack will be given priority; the signal from the coaxial digital input jack will not 
be input. Digital signals applied to the digital input connectors are handled as INPUT 9 and 10.

In order to record a digital signal, the external clock switch must be turned on.

If you want to use the optical digital input jack to input ADAT signals, simultaneously press the 

 

and the 

 

 to select ADAT Input/Output mode. This allows ADAT format signals to be input 

from the optical input jack.

 

Use these jacks to send digital audio to a digital audio device such as an MD or DAT. Digital signals output from the 
digital output connectors are handled as OUTPUT 9 and 10.

If you want to use the optical digital output jack to output ADAT signals, press the 

 

 to select 

ADAT Output mode, or simultaneously press the 

 

 and the 

 

 to select 

ADAT Input/Output mode. This allows ADAT format signals to be output from the optical input jack.

 

Connect to these jacks when you want to input audio signals from audio devices or MIDI sound modules.

UA-1000_e.book 15 ページ ２００３年８月６日　水曜日　午前１１時５２分