Crate Amplifiers CA30 DG 用户手册

Specifications and information in this manual are subject to change without notice.

Output Power Rating:

30 watts RMS @ 1% distortion

High:

+/-15dB @ 10kHz

Mid:

+/-15dB @ 400–1.2kHz (Contour)

Low:

+/-15dB @ 80Hz

Input Impedance:

1.5M ohm

Input Sensitivity:

20mV RMS

Sens. to Line out:

20mV

Max Input Signal:

10v RMS (28v peak to peak)

Insert Jack:

Line Out .7v RMS, Line In .7v RMS

Insert Jack Input Impedance:

44k ohm

Insert Jack Output Impedance:

2.2k ohm

Line Out Output Impedance:

2.2k ohm (Lo-Z), 2.2k ohm (Hi-Z)

Internal Speaker:

8” Poly cone coaxial with dome tweeter;
4 ohms; 50 watts; 1” voice coil

Power Requirements:

120VAC, 60Hz, 50VA
100/115VAC, 50/60Hz, 50VA
230VAC, 50/60Hz, 50VA

Size and Weight:

13”H x 15”W x 12”D, 30 lbs.

Technical Specifications:

CA30D Acoustic Amplifier

Declaration of Conformity

Manufacturer’s Name: SLM Electronics

Corporate Headquarters: 1901 Congressional Drive, St. Louis, Missouri 63146

Primary Production Facility: 700 Hwy 202 W, Yellville, Arkansas, 72687

Product Type: Audio Amplifier

Products meet the regulations for compliance marking under:

ETL standards UL6500 of UL813
CSA standards E60065 or C22.2 No.1-M90
CE safety standard EN60065
CE EMC standards EN55103 or EN55013 and EN61000
FCC standards 47CFR 15.107 and 15.109 Class A
C-tick designation Level 2, ABN #56748810738, ARBN# N222
KETI standard K60065 (limited model approval)

Compliance Support Contact: SLM Electronics, Attn: R&D Compliance Engineer

1901 Congressional Drive, St Louis, Missouri, 63146 • Tel.: 314-569-0141, Fax: 314-569-0175

www.crateamps.com

1400 Ferguson Avenue • St. Louis, MO 63133

47-939-03 • 040504