Roland FP-5 用户手册
51
Chapter 4 Other Functions
fig.04-12.e
Local Control ON: The keyboard and the internal sound
generator are in a linked state.
fig.04-13.e
Local Control OFF: The keyboard and the internal sound
generator are in an unlinked state. No sound will be
produced by the keyboard when it is played.
fig.04-14.e
* When connecting a unit in the Roland MT series, you don’t
need to switch off Local Control. MT units transmit Local Off
messages when their power is switched on. If you first switch
on the FP-5, then the MT-series device, Local Control is
automatically switched off on the FP-5.
messages when their power is switched on. If you first switch
on the FP-5, then the MT-series device, Local Control is
automatically switched off on the FP-5.
1.
Switch to Function mode, and press the [Song]
button.
button.
fig.04-15
2.
Press the [-] or [+] button to switch Local Control
on and off.
on and off.
Setting the MIDI Out Mode
By setting the MIDI Out Mode, you can select to have a more
suitable (to the external MIDI device) selection of MIDI data
be output from the MIDI Out connector when you make tone
changes on the FP-5.
Four settings for the MIDI Out Mode are available.
“MIDI Out Mode 1” is the power-up default setting.
1.
Switch to Function mode, and press the [Play/
Stop] button.
Stop] button.
fig.04-17
2.
Press the [-] or [+] button to select the MIDI Out
Mode.
Mode.
(1)
MIDI
MIDI
MIDI
MIDI
(2)
IN
IN
OUT
OUT
Sequencer
Memory
Sound
Generator
Each note played
is sounded twice
Thru function On
Local On
Local On
Sound is emitted
Sound Generator
Local Off
No sound produced
Sound Generator
flashes in red
Indication
Descriptions
1
MIDI Out Mode 1
This setting is suitable for the connection of
sequencers. The MIDI information (for exam-
ple: Bank select, Program Change, Settings of
Effects, and so on) is output from the MIDI
Out connector when you make a tone change
on the FP-5.
2
MIDI Out Mode 2
This setting is suited for connecting to a sound
module.
The MIDI information (for example:
Bank select) is not output from the MIDI Out
connector when you make a tone change on
the FP-5.
3
MIDI Out Mode 3
You can transmit performance data recorded
with the FP-5.
Additionally, the MIDI messages that are out-
put have the same content as those in MIDI
Out Mode 1.
4
MIDI Out Mode 4
The MIDI messages that are output have the
same content as those in MIDI Out Mode 3.
However, these are not transmit to FP-5’s
sound module.
Additionally, the local control is switched to
flashes in red
FP-5_e.book 51 ページ ２００５年１月２６日 水曜日 午前１０時２２分