Roland EP-760 用户手册

 

ep-760 Before you start playing

Connect the supplied pedal to one of the Pedal jacks.
A DP-2 is supplied with the ep-760.

If the pedal is connected to the Damper jack, it can be 
used as a damper pedal (to sustain the notes played on 
the keyboard). If the pedal is connected to the Soft jack, 
it can be used as a soft pedal (to lower the volume). 

While this pedal is pressed, notes will be sustained even 
after you take your fingers off the keys.
On an acoustic piano, holding down the damper pedal 
will allow the remaining strings to resonate in sympathy 
with the sounds that you played from the keyboard, 
adding a rich resonance. The ep-760 simulates this sym-
pathetic resonance.

You can change the amount of resonance applied with 
the damper pedal. Please refer to “Changing the damper 
pedal’s resonance”, p. 24.

When you hold down this pedal and play the keyboard, 
the sound will have a softer tone.

This function allows you to sustain only the sounds of 
the keys that were already played when you pressed the 
pedal. 
This is a function that needs to be selected (p. 26), in 
which case the Soft function is no longer available.

A

B

Strong tension applied to the cord may damage or break it. Be 
careful not to pull the cord accidentally, or to apply strong pres-
sure to it. 

Set up the music stand as shown in the figure below.

Before moving the ep-760, be sure to remove the music stand as 
a safety precaution.

ep-760.GB  Page 8  Thursday, May 16, 2002  8:03 PM