Roland HP302 用户手册

 

Before You Play

 

The pedals perform the following operations. You’ll use 

them mainly when playing piano.

 

Use this pedal to sustain the sound.

While this pedal is held down, notes will be sustained for an 

extended time even if you release your fingers from the 

keyboard.

The length of sustain will change subtly depending on how 

deeply you press the pedal.

On an acoustic piano, holding down the damper pedal will 

cause the strings for notes other than the ones you actually 

play to vibrate in sympathy with what you’ve played, 

producing a rich resonance. The HP305/HP302 simulates this

sympathetic vibration (damper resonance).

 

You can modify the sound of the sympathetic 

 

The notes you are pressing when this pedal is depressed will 

be sustained.

 

This pedal is used to make the sound softer.

Playing with the soft pedal depressed produces a sound that 

is not as strong as when otherwise played with the 

equivalent strength. This is the same function as the left 

pedal of an acoustic piano.

The softness of the tone can be varied subtly by the depth to 

which you press the pedal.

 

You can switch the function of the sostenuto pedal 

 

If you disconnect the pedal cord from the HP305/HP302 

while the power is turned on, the pedal effect will 

remain applied. You must connect or disconnect the 

pedal cord while the HP305/HP302’s power is switched 

off.

 

About the Adjuster

 

If you feel that the pedal is unstable (for example if you’ve 

moved the HP305/HP302 to a different location), you can 

adjust the adjuster located on the bottom of the pedals as 

follows.

Turn the adjuster to lower it until the adjuster is in firm 

contact with the floor. The pedal may be damaged if there is 

a gap between the adjuster and the floor. In particular, when 

you’ve placed the HP305/HP302 on carpet, you must turn 

the adjuster until it is pressing firmly against the floor.

 

Using the Pedals

HP305_302_e.book 22 ページ ２０１０年１月５日　火曜日　午後１２時２分