Roland HP302 用户手册

 

Connecting to Other Devices

 

The following become possible once you connect a USB cable (available separately) between the USB connector on the HP305’s left end of the bottom 

panel or HP302’s rear panel and the USB connector of your computer.

• You can use the HP305/HP302 to play sounds from SMF music files played back with MIDI software.

• By exchanging MIDI data with sequencer software, you can save songs recorded with the HP305/HP302 to your computer, and enjoy a variety of 

musical control and editing features.

 

fig.aaa

 

* Connect the HP305/HP302 to your computer as shown below.

Normally, you don’t need to install a driver in order to connect the HP305/HP302 to your computer. However, if some problem occurs, or if the 

performance is poor, using the Roland original driver may solve the problem.

Specify the USB driver you want to use, and then install the driver.

 

If you change this setting, turn on the power once again.

 

This setting is remembered even when the power is turned off.

 

For details on downloading and installing the Roland original 

driver, refer to the Roland website.

 

Connecting a Computer

USB connector

USB connector

USB cable

Computer

USB connector

USB connector

USB cable

Computer

 

Changing the USB Driver Settings (USB Driver)

 

Generic

Choose this if you want to use the standard USB 
driver that was included with your computer. 
Normally, you should use this mode.

Original

Choose this if you want to use a USB driver 
downloaded from the Roland website.

Here you can download the original driver, and view the 

installation procedure and operating requirements.

Roland website: http://www.roland.com/

HP305_302_e.book 72 ページ ２０１０年１月５日　火曜日　午後１２時２分