Roland JUNO-G 用户手册
122
Editing a Audio Phrase (Sample)
This operation stretches or shrinks the sample to modify the length
or tempo. You can stretch or shrink the sample by a factor of one half
to double the original length.
or tempo. You can stretch or shrink the sample by a factor of one half
to double the original length.
*
You cannot execute this with more than one sample selected.
1.
In the SAMPLE EDIT screen, press [F3 (MODIFY)] to open
the Sample Modify Menu window.
2.
Press [F3 (TIME STRETCH)].
fig.TIMESTRETCH
3.
Press [
] [
] to select the parameter.
4.
Use the VALUE dial or [INC] [DEC] to specify the tempo/length.
When setting the BPM (tempo) value, you can hold down
[SHIFT] and turn the VALUE dial, or use [INC] [DEC] to adjust
the value to the right of the decimal point.
[SHIFT] and turn the VALUE dial, or use [INC] [DEC] to adjust
the value to the right of the decimal point.
5.
Press [F6 (EXEC)].
A message will ask you for confirmation.
6.
To execute, press [F6 (EXEC)].
The length of the sample will be changed as specified.
*
To cancel, press [F5 (CANCEL)].
The
chop
function divides a sample waveform into separate notes.
*
You cannot execute this with more than one sample selected.
1.
In the SAMPLE EDIT screen, press [F3 (MODIFY)] to open
the Sample Modify Menu window.
2.
Press [F4 (CHOP)].
fig.CHOP
3.
Specify the point(s) at which the sample is to be divided.
4.
Audition the sample as described in the section
5.
Press [F6 (EXEC)].
A message will ask you for confirmation.
6.
To execute the division, press [F6 (EXEC)].
The divided samples will be added to the sample list.
*
To cancel, press [F5 (CANCEL)].
When you execute the Chop operation, a message will ask
whether you want to execute Create Rhythm.
whether you want to execute Create Rhythm.
Create Rhythm
This creates a rhythm set using the samples that were divided
by the Chop operation, and assigns it to a part. The samples are
assigned successively starting at the C2 key.
by the Chop operation, and assigns it to a part. The samples are
assigned successively starting at the C2 key.
7.
To execute Create Rhythm, press [F6 (EXEC)].
The Create Rhythm window opens.
*
To cancel, press [F5 (CANCEL)].
8.
8. Use [
] [
] to select the part to which you want to
assign the rhythm set, and press [F6 (SELECT)].
A message will ask you for confirmation.
*
You can’t select a part in Patch mode.
9.
To execute, press [F6 (EXEC)].
The samples will be assigned to the selected part as a rhythm set.
*
To cancel, press [F5 (CANCEL)].
If you select a different rhythm set, the rhythm set to which the
samples are assigned will disappear. If you want to keep this
rhythm set, press [WRITE] to save it. (p. 124)
samples are assigned will disappear. If you want to keep this
rhythm set, press [WRITE] to save it. (p. 124)
Procedure for Dividing a Sample
You can freely specify the dividing point(s).
1.
Press [
] [
] to move the cursor to “Current Address.”
2.
Use the VALUE dial or [INC] [DEC] to move the point.
3.
At the location where you want to divide the sample, press
[F2 (ADD)].
The current location will be the dividing point.
4.
Repeat steps
2
and
3
to specify other dividing points.
Stretching or Shrinking a Sample
(TIME STRETCH)
(TIME STRETCH)
Parameter
Explanation
BPM
Change the BPM of the sample to the BPM you specify.
Time
Specify the length of the sample as a time value.
Rate
Specify the length relative to the current length of the
sample. (
sample. (
50.0–200.0%
)
Type
Lower settings of this value will make the sound more
suitable for faster phrases, and higher settings will make
the sound more suitable for slower phrases.
(
suitable for faster phrases, and higher settings will make
the sound more suitable for slower phrases.
(
TYPE01–TYPE10
)
Quality Adjust
Make fine adjustments to the tonal quality of the Time
Stretch. (
Stretch. (
1–10
)
Dividing a Sample into Notes
(CHOP)
(CHOP)
JUNO-G_e.book 122 ページ ２００６年２月１３日 月曜日 午後２時４４分