Roland JUNO-G 用户手册

 

You must switch the USB Mode before you connect the JUNO-G to your computer via the USB cable. If you change this setting while the 
JUNO-G is connected, the computer may fail to recognize it correctly.

 

 

The JUNO-G allows you to play the keyboard using temperaments other than equal temperament. The pitch is specified in one-cent units relative to the equal tempered pitch.

 

One set of Scale Tune settings can be created in Patch mode. In Performance mode, this can be set for each part of the performance (p. 66).

 

• The selected scale applies to MIDI messages received from an external MIDI device.
Scale Tune 
Switch

OFF, ON

Turn this on when you wish to use a tuning scale other than equal temperament.

Patch Scale 
Tune for C–B

-64– +63

Make scale tune settings for Patch mode.

 

USB Mode

STORAGE, MIDI

Specifies the operating mode of the USB connector when the power is turned on.

 

 Storage mode. Select this if you want to transfer files.

 

 MIDI mode. Select this if you want to exchange MIDI messages with a sequencer or other program.

 

USB-MIDI 
Thru

OFF, ON

When USB Mode is set to “MIDI,” this switch specifies whether MIDI messages received at the MIDI connector will be retrans-
mitted from the MIDI OUT connector (ON) or not (OFF).

 

Keyboard Velocity

REAL, 1–127

Velocity value that will be transmitted when you play the keyboard

 

 Actual keyboard velocity will be transmitted.

 

 A fixed velocity value will be transmitted regardless of how you play.

Touch Sens

LIGHT, MEDIUM, 
HEAVY

Keyboard’s touch

 

 Light weight synthesizer keyboard like

 

 Standard

 

 Acoustic piano simulation

 

Control Pedal Assign

CC01–31, 33–95, 
BEND UP, 
BEND DOWN, 
AFTERTOUCH, 
OCT UP, 
OCT DOWN, 
START/STOP, 
PUNCH IN/OUT, 
TAP TEMPO, 
PROG UP, 
PROG DOWN, 
FAVORITE UP, 
FAVORITE DOWN, 
ARP SW, 
RHY START/STOP, 
CHORD SW, 
LIVE SET UP, 
LIVE SET DOWN, 
LOOP

Function of the pedal connected to the PEDAL CONTROL jacks

 

 Controller numbers 1-31, 33-95

 

 The pitch will rise in semitone steps (maximum 4 octaves) each time you press the pedal.

 

 The pitch will fall in semitone steps (maximum 4 octaves) each time you press the pedal.

 

 Aftertouch

 

 Each pedal press raises the key range in octave steps (up to 3 octaves higher).

 

 Each pedal press lowers the key range in octave steps (up to 3 octaves lower).

 

 The song recorder will start/stop.

 

 Manual punch-in/out recording will start/stop.

 

 Tap tempo (a tempo specified by the interval at which you press the pedal).

 

 The next sound number will be selected.

 

 The previous sound number will be selected.

 

 The favorite patch/performance of the next number or bank will be selected.

 

 The favorite patch/performance of the previous number or bank will be selected.

 

 Arpeggio/Rhythm function on/off

 

 Rhythm pattern playback on/off

 

 Chord memory function on/off

 

 Switches to the next step within a Live Setting list.

 

 Switches to the previous step within a Live Setting list.

 

 Loop play on/off

Control Pedal Polarity

STANDARD, 
REVERSE

Selects the polarity of the pedal.

On some pedals, the electrical signal output by the pedal when it is pressed or released is the opposite of 
other pedals. If your pedal has an effect opposite of what you expect, set this parameter to “REVERSE.” If 
you are using a Roland pedal (that has no polarity switch), set this parameter to “STANDARD.”

Hold Pedal Polarity

STANDARD, 
REVERSE

Continuous Hold Pedal

OFF, ON

Determines whether the HOLD PEDAL jack will provide support for half-pedaling (ON), or not (OFF).

When this is set to support use of half-pedaling techniques, you can then connect an optional expression 
pedal (DP-10, etc.), and employ pedal work to achieve even finer control in performances in which piano 
tones are used.

JUNO-G_e.book 159 ページ ２００６年２月１３日　月曜日　午後２時４４分