Roland KF-90 用户手册

In addition to the functions introduced in “Chapter 4 

Recording and Saving Performances,” the KF-90 features a 

variety of other recording functions.

You can use any of the four methods below to record with 

the KF-90.

Although you will normally be using “Replace Recording,” 

whereby previously recorded material is erased when new 

sounds are recorded, you’ll find that you can record songs 

easily by using this method in combination with other 

recording methods.

This is the normal method for recording. New material is 

recorded as previously recorded material is erased.

New notes are recorded as a layer on top of notes recorded 

earlier.

Specified measures are recorded repeatedly, with new notes 

being combined with existing ones.

This is handy when you’re making rhythm parts, such as by 

layering different percussion tones while recording the same 

passage over and over.

You can re-record only a specified passage as you listen to a 

recorded performance.

A Composer Navigator screen appears.

fig.05-01.e_50

A Recording Mode screen like the one shown below 

appears.

fig.05-02.e_50

Display

Recording Method

Replace Recording

Mix Recording

Loop Recording

Punch In Recording at the 

passage between the markers.

Punch In Recording starts at the 

place where you depress the 

pedal.

You can add tempo changes to a 

recorded composition. 

Touch <Exit> to go back to the previous screen.