Roland KF-7 用户手册
111
Chapter 5 User Program Registration
Chapter 5
Copying Sets of User
Programs on Disks to the
User Memory
Programs on Disks to the
User Memory
You can copy sets of User Programs saved on floppy disks
and to user memory.
and to user memory.
You can also copy sets of User Programs saved in user
memory and to floppy disks.
memory and to floppy disks.
1.
Insert the disk with the settings to be copied in the disk
drive.
2.
Touch the [User Program] button.
3.
Touch <File>.
4.
Touch <Copy>.
A “Copy User Programs screen” like the following
appears.
appears.
fig.d-upgcopy.eps_50
Specifying the copy source
5.
Touch <Disk>
to select the set of User
Programs you want to copy.
When “All” is selected, all of the sets of User Programs
on the disk are copied to user memory.
on the disk are copied to user memory.
Specifying the copy destination
6.
Touch <User>
to select the copy destination
for the set of User Programs.
If a User Program name is displayed, already a User
Program saved to that number is already.
If you select a number with User Programs data, and
then copy data to that number, the previously saved
User Programs are deleted. If you do not want to delete
the saved User Programs, select a number in the save-
destination column for which no name is displayed.
Program saved to that number is already.
If you select a number with User Programs data, and
then copy data to that number, the previously saved
User Programs are deleted. If you do not want to delete
the saved User Programs, select a number in the save-
destination column for which no name is displayed.
7.
Touch <Execute>.
The set of User Programs on the disk is saved to user memory.
* Never turn off the power or eject the floppy disk from the disk
drive while the operation is in progress. Doing so will damage
the KF-7’s internal memory, making it unusable.
the KF-7’s internal memory, making it unusable.
■
Coping Sets of User Programs
Stored in the User Memory to
Disks
Stored in the User Memory to
Disks
You can take User Program sets saved in user memory and
copy them to floppy disks.
copy them to floppy disks.
In this case, in the Copy User Programs screen in Step 4
above, touch the large arrow icon in the center to get the
arrow to point up. This sets the KF-7 to copy the User
Program set in the user memory to the floppy disk.
above, touch the large arrow icon in the center to get the
arrow to point up. This sets the KF-7 to copy the User
Program set in the user memory to the floppy disk.
The rest of the procedure is identical to that used for copying
sets of User Program set from disks to user memory.
sets of User Program set from disks to user memory.