Roland KF-7 用户手册
17
Before You Start Playing
Before You
Start Playing
Damper Pedal
Use this pedal to sustain the sound.
While the pedal is depressed, long lingering reverberations
continue to be added to the sound after you release from the
keys. When you depress the damper pedal on an acoustic
piano, the sound from the strings that were struck resonates
with other strings, adding rich reverberations and broadness
to the sound. You can adjust this resonance (Sympathetic
Resonance) when the damper pedal is depressed.
Use this pedal to sustain the sound.
While the pedal is depressed, long lingering reverberations
continue to be added to the sound after you release from the
keys. When you depress the damper pedal on an acoustic
piano, the sound from the strings that were struck resonates
with other strings, adding rich reverberations and broadness
to the sound. You can adjust this resonance (Sympathetic
Resonance) when the damper pedal is depressed.
→ You can vary the amount of resonance applied when the
Sostenuto Pedal
When this pedal is depressed, reverberations are applied
only to the keys being played at that time.
When this pedal is depressed, reverberations are applied
only to the keys being played at that time.
Soft Pedal
This pedal is used to make the sound softer.
Playing with the soft pedal depressed produces a sound that
is not as strong as when otherwise played with the
equivalent strength. This is the same function as the left
pedal of an acoustic piano.
This pedal is used to make the sound softer.
Playing with the soft pedal depressed produces a sound that
is not as strong as when otherwise played with the
equivalent strength. This is the same function as the left
pedal of an acoustic piano.
→ When connected to the Sostenuto jack or the Soft jack, you can
also assign other functions to the connected pedal. For more
information, see “Assigning Functions to Pedals and
Performance Pads (Pedal Setting/User Functions)” (p. 143).
information, see “Assigning Functions to Pedals and
Performance Pads (Pedal Setting/User Functions)” (p. 143).
→ By providing two more pedals, you can use three pedals at the
same time. If you wish to purchase the optional pedal (DP-2/
DP-6), please contact the dealer where you purchased the
keyboard.
DP-6), please contact the dealer where you purchased the
keyboard.
Turning the Power On and Off
941
NOTE
Be sure to follow the steps below when turning the power on or off.
By turning on devices in the wrong order, you risk causing
malfunction and/or damage to speakers and other devices.
Turning On the Power
1.
Before you switch on the power, turn the volume down
all the way by rotating the [Volume] knob.
fig.00-04
2.
Press the [Power] switch on the back of the unit.
After a few seconds, the unit becomes operable and
playing the keyboard produces sound.
Adjust the volume at appropriate levels.
playing the keyboard produces sound.
Adjust the volume at appropriate levels.
fig.00-05.j
942
NOTE
This unit is equipped with a protection circuit. A brief interval (a few
seconds) after power up is required before the unit will operate
normally.
Turning Off the Power
1.
Before switching the power off, turn the volume all the
way down by rotating the [Volume] knob.
2.
Press the [Power] switch on the back of the unit.
The power is switched off.
fig.00-06.j
Rear panel
ON
Lower position
Rear panel
OFF
Upper position