Roland HP507 用户手册

The selected audio file and the sound of a digital audio player connected to the Input jacks can both be transposed for playback.

*  For some songs, an audio transpose setting other than 0 may affect the tone quality of the sound.

You can also change this setting by holding down the [Transpose] button and using the [–] [+] buttons.

(semitone units) Positive (+) values raise the pitch in semitone steps, and negative (-) values lower the pitch in semitone steps.

This setting specifies what the transpose will affect. You can use the transpose to change the 

pitch of both the song and the keyboard, only the pitch of the song, or only the pitch of the 

keyboard.

The sound of the keyboard

The song being played back and the sound being input via the Input jacks

The sound of the keyboard, the song being played back, and the sound being input via the Input jacks

You can change the pitch of the Tone 2 in Dual Play (p. 19) and Lower tone in Split Play (p. 20) an octave at a time.
Altering the pitch in one-octave units in this way is called “Octave Shift.”  

For example, you can raise the pitch of the Lower Tone to the same pitch of the Upper Tone in Split Play.
-2–0–+2 (octave)

You can choose whether to record as SMF or as audio.

You can also switch the recording mode by holding down the [

] (Rec) button and using the [–] [+] buttons.

SMF parts will be recorded separately. This allows you to re-record just a single part, or to overdub different parts.

The recording will be made as audio data. The recorded song can be used in your computer.

When you press the damper pedal during Dual play or Split play, the pedal effect is normally 

applied to both tones, but you can also select the tone to which the effect is to be applied.

All enabled

Applied only to the Tone 1 (in dual mode)/Right-hand Tone (in split mode)

Applied only to the Tone 2 (in dual mode)/Left-hand Tone (in split mode)

When you turn on the power, the center pedal functions as the sostenuto pedal (p. 14).
You can change the function of the pedal to a variety of other operations.
Sostenuto

Sets function to sostenuto pedal.

The pedal will have the same function as the [

] (Play/Stop) button.

Pressing the pedal will layer on Tone 2, used for Dual play.

*  The Layer function can be applied only when using Dual play.

Pressing the pedal will layer on a sound one octave higher.

*  The Octave function cannot be applied while using Twin Piano, Dual play, or Split play.

Save your settings as described in “Memory 

Backup” (p. 44).

Save your settings as described in “Memory 

Backup” (p. 44).